DSPIC33FJ64GS610

     dsPIC33FJXXGSXXX SMPS & Digital Power Conversion 16-bit Digital Signal Controller. These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as: • AC to DC Converters • DC to DC Converters • Power Factor Correction (PFC) • Uninterruptible power supply (UPS) • Inverters • Embedded Power-Supply Controllers • Circuit Breakers, Arc Fault Detection

• Operating Conditions
• 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
• dsPIC33F DSC Core
• Code-efficient (C and Assembly) architecture
• Two 40-bit wide accumulators
• Single-cycle (MAC/MPY) with dual data fetch
• Single-cycle mixed-sign MUL plus hardware divide
• 32-bit multiply support
• High-Speed PWM
• Up to nine PWM pairs with independent timing
• Dead time for rising and falling edges
• 1.04 ns PWM resolution
• PWM support for:
• DC/DC, AC/DC, Inverters, PFC, Lighting
• BLDC, PMSM, ACIM, SRM
• Programmable Fault inputs
• Flexible trigger configurations for ADC conversions
• Advanced Analog Features
• High-Speed ADC module:
• 10-bit resolution with up to two Successive Approximation Register (SAR) converters (up to 4 Msps)
• Up to four High-Speed Comparators with direct connection to the PWM module:
• 10-bit Digital-to-Analog Converter (DAC) for each comparator
• DAC reference output
• Timers/Output Compare/Input Capture
• Six general purpose timers:
• Five 16-bit and up to two 32-bit timers/counters
• Four Output Compare (OC) modules configurable as timers/counters
• Quadrature Encoder Interface (QEI) module configurable as timer/counter
• Four Input Capture (IC) modules
• Communication Interfaces
• Two UART modules (12.5 Mbps)
• With support for LIN 2.0 protocols and IrDA®
• Two 4-wire SPI modules (15 Mbps)
• ECAN™ module (1 Mbaud) CAN 2.0B support
• Two I2C™ modules (up to 1 Mbaud) with SMBus Support
• PPS to allow function remap
• Programmable Cyclic Redundancy Check (CRC)
• Direct Memory Access (DMA)
• 4-channel DMA with user-selectable priority arbitration
• UART, SPI, ECAN™, IC, OC, and Timers

• Architecture     16-bit
•  CPU Speed (MIPS)     40
•  Memory Type     Flash
•  Program Memory (KB)     64
•  RAM Bytes     9,216
•  Temperature Range C     -40 to 125
•  Operating Voltage Range (V)     3 to 3.6
•  I/O Pins     85
•  Pin Count     100
•  System Management Features     BOR
•  Internal Oscillator     7.37 MHz, 32 kHz
•  nanoWatt Features     Fast Wake/Fast Control
•  Digital Communication Peripherals     2-UART, 2-SPI, 2-I2C
•  Analog Peripherals     2-A/D 24x10-bit @ 4000(ksps) 4-D/A 1x10-bit @ 640(ksps)
•  Comparators     4
•  CAN (#, type)     1 ECAN
•  Capture/Compare/PWM Peripherals     4/4
•  16-bit PWM resolutions     16
•  Motor Control PWM Channels     18
•  Quatrature Encoder Interface (QEI)     2
•  Timers     4 x 16-bit 1 x 32-bit
•  Parallel Port     GPIO
•  DMA     4

 TQFP100 Paketindedir