Fiyat Teklifi İsteyiniz.

ATMEL ICE

 Atmel-ICE is a powerful development tool for debugging and programming Atmel ARM® Cortex®-M based Atmel SAM and AVR® microcontrollers with on-chip debug capability.

Supported Software

•     Perfectly supports Atmel Studio 6.2 or higher version
•     Directly supports ICC8AVR or higher version
•     Supports programming HEX files generated by ICCAVR, CVAVR, IAR, etc.

Atmel-ICE supported Devices:

•     Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces
•     Programming and on-chip debugging of all Atmel AVR XMEGA® family devices on both JTAG and PDI 2-wire interfaces
•     JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces
•     Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces
•     Programming of all Atmel tinyAVR® 8-bit MCUs with support for the TPI interface

Key Features

•     Fully compatible with Atmel Studio
•     Supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
•     Supports all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target)
•     Up to 128 software breakpoints
•     Supports programming and debugging of all Atmel AVR UC3 32-bit microcontrollers
•     Supports programming and debugging of all 8-bit AVR XMEGA devices
•     Supports programming and debugging of all 8-bit Atmel megaAVR® and tinyAVR devices with OCD
•     Supports programming and debugging of all SAM ARM Cortex-M based microcontrollers
•     Target operating voltage range of 1.62V to 5.5V
•     Draws less than 3mA from target VTref when using debugWIRE interface and less than 1mA for all other interfaces
•     Supports JTAG clock frequencies from 32kHz to 7.5MHz
•     Supports PDI clock frequencies from 32kHz to 7.5MHz
•     Supports debugWIRE baud rates from 4kbit/s to 0.5Mbit/s
•     Supports aWire baud rates from 7.5kbit/s to 7Mbit/s
•     Supports SPI clock frequencies from 8kHz to 5MHz
•     Supports SWD clock frequencies from 32kHz to 2MHz
•     USB 2.0 high-speed host interface
•     USB powered
•     ITM serial trace capture at up to 3MB/s
•     Supports 10-pin 50-mil JTAG connector with both AVR and Cortex pinouts. The standard probe cable supports AVR 6-pin ISP/PDI/TPI 100-mil headers as well as 10-pin 50-mil. An adapter is available to support 6-pin 50-mil, 10-pin 100-mil and 20-pin 100-mil headers. Several kit options are available with different cabling and adapters.

Paket içeriği (Full Kit Contents) :

•     Atmel-ICE unit
•     USB cable (1.8m, high-speed, micro-B)
•     Adapter Board ( Containing 50-mil AVR, 100-mil AVR/SAM and 100-mil 20-pin SAM adapters )
•     IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector
•     50-mil 10-pin mini squid cable with 10 x 100-mil sockets