LPC1788FBD144

 

LPC1788FBD144 LQFP144

 

               The LPC1788 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 120 MHz. Features include 512 kB of flash memory, 96 kB of data memory, Ethernet, USB 2.0 Host/OTG/Device , 8-channel DMA controller, 5 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, QEI, LCD controller, SD/MMC interface, motor control PWM, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 109 general purpose I/O pins. 

 

Features and benefits

  •      Functional replacement for LPC23xx and 24xx family devices
  •     ARM Cortex-M3 processor, running at frequencies of up to 120 MHz
  •     ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
  •     Multilayer AHB matrix interconnect provides a separate bus for each AHB master
  •     Split APB bus allows for higher throughput
  •     Cortex-M3 system tick timer, including an external clock input option
  •     Standard JTAG test/debug interface, Serial Wire Debug and Serial WireTrace Port
  •     Emulation trace module supports real-time trace
  •     Boundary scan for simplified board testing
  •     Non-maskable Interrupt (NMI) input
  •     512 kB on-chip flash program memory
  •     96 kB on-chip SRAM
  •     4 kB on-chip EEPROM
  •     In-System Programming (ISP) and In-Application Programming (IAP) capabilities
  •     LCD controller, supporting both STN and TFT displays
  •     External Memory Controller (EMC)
  •     Eight channel General Purpose DMA controller (GPDMA)
  •     Ethernet MAC with MII/RMII interface and associated DMA controller
  •     USB 2.0 full-speed dual port device/host/OTG controller with on-chip PHY and DMA
  •     Five UARTs with fractional baud rate generation
  •     Three SSP controllers with FIFO and multi-protocol capabilities
  •     Three enhanced I2C-bus interfaces
  •     I2S (Inter-IC Sound) interface for digital audio input or output
  •     CAN controller with two channels
  •     SD/MMC memory card interface
  •     Up to 109 General Purpose I/O (GPIO) pins
  •     Two external interrupt inputs configurable as edge/level sensitive
  •     Four general purpose timers/counters
  •     Quadrature encoder interface that can monitor one external quadrature encoder
  •     Two standard PWM/timer blocks with external count input option
  •     Real-Time Clock (RTC) with a separate power domain
  •     Windowed Watchdog Timer (WWDT)
  •     12-bit Analog-to-Digital Converter (ADC) with conversion rates up to 400 kHz
  •     10-bit Digital-to-Analog Converter (DAC)
  •     Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
  •     Wake-up Interrupt Controller (WIC)
  •     Processor wake-up from Power-down mode via any interrupt
  •     Brownout detect with separate threshold for interrupt and forced reset
  •     On-chip Power-On Reset (POR)
  •     On-chip crystal oscillator with an operating range of 1 MHz to 25 MHz
  •     12 MHz Internal RC oscillator (IRC) trimmed to 1% accuracy
  •     Unique device serial number for identification purposes
  •     Single 3.3 V power supply (2.4 V to 3.6 V)

 

 

Applications

  •     eMetering
  •     Lighting
  •     Industrial networking
  •     Alarm systems
  •     White goods
  •     Motor control

 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

LPC1788FBD144

  • Brand: NXP
  • Product Code: LPC1788FBD144
  • Availability: In Stock
  • Fiyat : 100.00TL
  • KDV Dahil : 118.00TL

Tags: LPC1788FBD144