Out Of Stock PIC18F46K20-I/P

 

PIC18F46K20-I/P

         

http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en026331

 

High Performance RISC CPU:

 

  • C Compiler Optimized Architecture:
  • Optional extended instruction set designed to optimize re-entrant code
  • Up to 1024 bytes Data EEPROM
  • Up to 64 Kbytes Linear program memory addressing
  • Up to 3936 bytes Linear data memory addressing
  • Up to 16 MIPS operation
  • 16-bit wide instructions, 8-bit wide data path
  • Priority levels for interrupts
  • 31-level, software accessible hardware stack
  • 8 x 8 single-cycle hardware multiplier
  • Flexible Oscillator Structure:
  • Precision 16 MHz internal oscillator block:
  • Factory calibrated to ± 1%
  • Software selectable frequencies range of 31 kHz to 16 MHz
  • 64 MHz performance available using PLL
  • no external components required
  • Four crystal modes up to 64 MHz
  • Two external clock modes up to 64 MHz
  • 4X Phase Lock Loop (PLL)
  • Secondary oscillator using Timer1 @ 32 kHz
  • Fail-Safe Clock Monitor:
  • Allows for safe shutdown if peripheral clock stops
  • Two-Speed Oscillator Start-up

 

Special Microcontroller Features:

 

  • Operating Voltage Range: 1.8V to 3.6V
  • Self-Programmable under Software Control
  • Programmable 16-Level High/Low-Voltage Detection (HLVD) module:
  • Interrupt on High/Low-Voltage Detection
  • Programmable Brown-out Reset (BOR):
  • With software enable option
  • Extended Watchdog Timer (WDT):
  • Programmable period from 4 ms to 131s
  • Single-Supply 3V In-Circuit Serial Programming™ (ICSP™) via two pins
  • In-Circuit Debug (ICD) via Two Pins
  • Extreme Low-Power Management with nanoWatt XLP™:
  •  
  • Sleep mode: 100 nA
  • Watchdog Timer: 500 nA
  • Timer1 Oscillator: 500 nA @ 32 kHz

 

Analog Features:

  • Analog-to-Digital Converter (ADC) module :
  • 10-bit resolution, 13 External Channels
  • Auto-acquisition capability
  • Conversion available during Sleep
  • 1.2V Fixed Voltage Reference (FVR) channel
  • Independent input multiplexing
  • Analog Comparator module:
  • Two rail-to-rail analog comparators
  • Independent input multiplexing
  • Voltage Reference (CVREF) module
  • Programmable (% VDD), 16 steps
  • Two 16-level voltage ranges using VREF pins

 

Peripheral Highlights:

  • Up to 35 I/O pins plus 1 input-only pin:
  • High-Current Sink/Source 25 mA/25 mA
  • Three programmable external interrupts
  • Four programmable interrupt-on-change
  • Eight programmable weak pull-ups
  • Programmable slew rate
  • Capture/Compare/PWM (CCP) module
  • Enhanced CCP (ECCP) module:
  • One, two or four PWM outputs
  • Selectable polarity
  • Programmable dead time
  • Auto-Shutdown and Auto-Restart
  • Master Synchronous Serial Port (MSSP) module
  • 3-wire SPI (supports all 4 modes)
  • I2C™ Master and Slave modes with address mask
  • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
  • Supports RS-485, RS-232 and LIN
  • RS-232 operation using internal oscillator
  • Auto-Wake-up on Break
  • Auto-Baud Detect

 

 

  • Core Size    8-Bit
  • Speed    64MHz
  • Connectivity    I²C, SPI, UART/USART
  • Peripherals    Brown-out Detect/Reset, HLVD, POR, PWM, WDT
  • Number of I /O    35
  • Program Memory Size    64KB (32K x 16)
  • Program Memory Type    FLASH
  • EEPROM Size    1K x 8
  • RAM Size    3.8K x 8
  • Voltage - Supply (Vcc/Vdd)    1.8 V ~ 3.6 V
  • Data Converters    A/D 14x10b
  • Oscillator Type    Internal
  • Operating Temperature    -40°C ~ 85°C
  • Package / Case    40-DIP (0.600", 15.24mm)

 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

PIC18F46K20-I/P

  • Brand: Microchip
  • Product Code: PIC18F46K20-I/P
  • Availability: Out Of Stock
  • Fiyat : 30.00TL
  • KDV Dahil : 35.40TL

Tags: PIC18F46K20-I/P