HN3806 600 Pals Encoder

 

HN3806-AB-600   600 Pals Encoder

AB Fazları direk olarak yüksek voltajlı beslemeye bağlanmaması gerekmektedir. Bu yapılırsa ürün bozulur.

  

     Rotasyonel hızı ölçmek için kullanılır. Nesnelerin hız, açı ve hızlanmasını ölçer.

     This module is ideally suited to adding rotation detection to your project and is compatible with microcontrollers such as the Arduino. The encoder lets you add control to your project similar to radio volume control knobs in cars and detecting rotation direction, speed in machines. The rotary 6mm shaft provides a large range of compatible knobs to choose from allowing you to get the right knob for your job.

 

Özellikler:

  • HN3806-AB
  • Pals Hızı: 600
  • Çalışma Voltajı: DC 5V-24V
  • Mil Çapı: 6mm
  • Dış Çap: 38mm
  • Çıkış: AB 2 Faz çıkış. Kare dalga pals
  • Çıkış Tipi: NPN open-collector
  • Maksimum mekanik hız: 5000 R / min
  • Tepki frekansı: 30KHz
  • Kablo Uzunluğu: 2 Metre

 

Bağlantı:

Yeşil A Faz
Beyaz B Faz
Kırmızı VCC Besleme +
Siyah Toprak Ground

 

Paket İçeriği:

  • 1 Adet HN3806 600 Pals Encoder

 

     HN3806 Photoelectric Incremental AB Two Phases Shaft NPN Rotary Encoder [5V-24V] is an AB two-phase, incremental rotary encoder, which can be used for detecting and measuring the position or rotational speed of an object, according to its degree angle locomotion. A rotary encoder, known as a shaft encoder, is an electro-mechanical transducer, to convert the angular position or locomotion to an electrical signal (digital or analog signal). This transducer uses optical sensing technology, which gives the most accurate results with high resolution. This incremental encoder converts the angular position of its rotor to a series (AB two-phase) of square waves, by utilizing a rotating grating disk and optocoupler.

     This HN3806 encoder can be used for detecting and measuring the angle, speed, length, and acceleration of the desired objects, which is useful for smart controlling of any displacement and fixed-length in CNC machine, motor feedback and any closed-loop control systems. This encoder is based on metallic construction, so it is rugged and rigid, which is idealized for stressful industrial conditions such as oil well drilling, industrial machine control, agricultural automation, web process control, robotics, elevators, construction equipment, cranes, and so on.

 

Features:

  • AB two-phase, pulse signal generation count can be identified by the rotation direction of the grating disk and optocoupler.
  • Performance: 400 Pulse per Revolution
  • DC5-24V wide supply voltage -Maximum mechanical speed: 6300 rev/min -Dimensions:
  • The encoder body size: φ38mm;
  • Shaft: φ6 × 16mm; -Axis platform: high 5mm, φ20mm;
  • Fixing hole: M3 screws,
  • Three mounting holes on the circle 30 and the other three mounting holes in the 28th round; side of the outlet.

 

Applications:
     Suitable for intelligent control of various displacement measurement, automatic fixed-length leather automatic guillotine machines, steel cut length control, civil measured height human scale, Students racing robots.

 

Output:
     AB rectangular two-phase quadrature pulse output circuit output NPN open collector output type, this output type can and with internal pull-up resistor connected directly to the microcontroller or PLC, such as 51 single or Mitsubishi PLC (PLC's input to switch connected to 0V should work), Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope (open collector output when there is no pull-up resistor, there is no voltage output) to oscilloscope please plus two pull-up resistor AB two-phaseoutput;

 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

HN3806 600 Pals Encoder

  • Brand: OEM
  • Product Code: HN3806 600 Pals Encoder
  • Availability: In Stock
  • Fiyat : 200.00TL
  • KDV Dahil : 236.00TL

Tags: HN3806-AB-600, AB, 2 Faz, DC 5V-24V, 600 Pals, Incremental, Optical, Rotary Encoder, Artan Optik Rotary Enkoder, Enkoder