TB6600 2 Faz 40V 4A Step Motor Sürücü
- Supply Voltage: 9~42VDC
- Input voltage: DC 12 ~ 48V
- Max Drive Current: 4A
- Chopping Frequency: 20KHZ
- H-bridge bipolar constant phase flow driven
- Up to 32 segments of six kinds subdivision modes available
- High-speed optocoupler input signal isolation
- Electrical input signal is TTL compatible
- Standard common anode single pulse interface
- Bipolar constant current chopper
- Offline hold function
- Semi-enclosed cabinet
- Provide energy semiautomatic current lock function
- Built-in temperature protection and over-current protection
- Stationary current is automatically reduced by half
- Operating Temperature: -10 to 45 ˚C
- DC+：DC power positive pole
- Note: Must guard against exceeding 45V, so as not to damage the module.
- DC-：DC power cathode
- A+, A-：Stepping motor one winding
- B+, B-：Stepping motor other winding
- PUL+, PUL -：Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
- DIR +, DIR- ：Stepping motor direction input, voltage level touched off, high level foreward , low level reverse
- ENA+、ENA-: motor free
- Typical Connection
CLOCK-in controlled Bipolar Stepping Motor Driver.
The TB67S109A is a two-phase bipolar stepping motor driver using a PWM chopper.
The clock in decoder is built in.
Fabricated with the BiCD process, rating is 50 V/4.0 A . )
- 1 Adet 4A TB6600 Step Motor Sürücü