Microchip PICkit 4 In-Circuit Debugger


Microchip PICkit 4 MPLAB In-Circuit Programmer Debugger – PG164140


     Fast programming, increased functionality, at the same price as its predecessor, the PICkit™ 3.

     The MPLAB PICkit 4 now has Programmer-to-Go functionality for 8-bit, 16-bit and 32-bit PIC MCUs and dsPICs and also SAM MCU devices . The firmware update comes with MPLAB X IDE v5.30.

     The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash microcontrollers and MPUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), starting with version 4.15. The MPLAB PICkit 4 is connected to the design engineer's computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go.

     The MPLAB PICkit 4 programs faster than its predecessor with a powerful 32,bit 300MHz SAME70 MCU and comes ready to support PIC®, AVR, SAM and dsPIC® MCU devices, and MPU devices. Along with a wider target voltage, the PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP. The PICkit 4 also has a unique programmer-to-go function with the addition of a micro SD card slot to hold project code and the ability to be powered by the target board.

Product Features

  •         Matches silicon clocking speed
    •             Programs as fast as the device will allow
  •         Target voltage of 1.20V to 5.5V
    •             Wide target voltage supports a variety of devices
  •         Program voltages:
    •             2.3V to 5.0V - Low voltage and high voltage program entry modes
    •             1.2V to 2.3V - Low voltage program entry mode only
  •         Can supply up to 50mA of power to the target
    •             Can be powered from the target to program in the field
  •         Minimal current consumption at <100µA from target
  •         Portable USB-powered and RoHS-compliant
    •             Powered by a high-speed USB 2.0, no external power required
    •             CE and RoHS-compliant
  •         8-pin single in-line header
    •             Supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway
  •         Compatibility
    •             Backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP
  •         Option to be self-powered from the target (2.7V to 5.5V)
  •         Programmer-to-Go (PTG) support
    •             SD card slot to holds program data
    •             Press on the logo to program the target
  •         Cost effective
    •             Features and performance at a fraction of the cost of comparable debugger/programmers
  •         Ease of maintenance and feature upgrade
    •             Add new device support and features by installing the latest version of MPLAB X IDE, which is available as a free download at http://www.microchip.com/mplab/mplab-x-ide


Paket İçeriği:

  • 1 Adet Microchip PICkit 4 Programlayıcı
  • 1 Adet Usb Kablo


Write a review

Note: HTML is not translated!
    Bad           Good


Microchip PICkit 4 In-Circuit Debugger

  • Brand: Microchip
  • Product Code: PG164140 PICKIT 4
  • Availability: In Stock
  • Fiyat : 4,290.00TL
  • KDV Dahil : 5,148.00TL

Tags: Microchip, PICkit 4, PICkit, Programlayıcı, Hata Ayıklayıcı, MPLAB, In-Circuit, Programmer, Debugger