1.27mm 10 Pin Flat Kablo


1.27mm 150mm 10 Pin Flat Kablo


     This is a 150mm (~6") long, 10-conductor cable that's especially ideal for many JTAG applications. Both ends are terminated with 2x5 pin female connectors with 1.27mm (0.05") spacing.

     These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop!

     One cable per order. The ribbon cable is 0.06mm/0.025" pitch and the connector is a 1.27mm (0.05") pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1" pitch connectors so be aware which you need!


  • IDC Connector Pitch:1.27mm
  • Cable Pitch:0.635mm
  • Cable Length: about 15CM
  • Number of Wire: 10 wires
  • Two 1.27mm pitch 2x5pin female IDC connectors on each end.


Write a review

Note: HTML is not translated!
    Bad           Good


1.27mm 10 Pin Flat Kablo

  • Brand: OEM
  • Product Code: 1.27mm 2x5 IDC 15cm Kablo
  • Availability: In Stock
  • Fiyat : 28.00TL
  • KDV Dahil : 33.04TL

Tags: 1.27mm, 150mm, 10 Pin, Flat Kablo, SWD, Jtag, Kablo