WT32-ETH01 Ethernet to Wifi / Bluetooth Gateway Modül
Embedded Serial Port Networking
İnternet Wifi Bluetooth Çevirici Haberleşme Kartı
İnternet Wifi ve bluetooth arasında haberleşme yaptırabileceğiniz geçit kartıdır. Embeded seri port yazılımı bulunmaktadır.
WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors. The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios.
- Using dual-core Xtensa 832-bit LX6 microcontroller. Integrated SPI flash memory 32 Mbit\SRAM 520 KB
- Multiple working modes using through holes and half-pads
- Support the four data ports of serial port, wifi, Ethernet and Bluetooth-compatible to be combined in pairs, and the data is transparently transmitted.
- Support complete TCP/IP protocol stack
- Support TCP server, TCP client, UDP server, UDP client working mode
- Rich wireless communication interface
- Supports four data ports of serial port, wifl, Ethernet and Bluetooth to be combined in pairs, and data is transparently transmitted
- Support to connect to the network via wired network or wifi to upgrade the firmware
- Support wifi to connect to the Internet or LAN through the router, establish tcp/udp connection, and access the user's designated service device.
- Support wired network access
- Support wifi to connect to the Internet or LAN through a router, establish a TCP/UDP connection, and access the user's designated server.
- Support user secondary development
- Industrial grade working temperature range: -40~+85
- Serial port baud rate: 80-5000000
- Network protocol: IPv 4, tcp/udp
- Software encryption: AES/RSA/ECC/SHA
- Products have passed FCC/CE/RoHS standard certification
|Protocols||802.11 b/g/n/e/i（802.11n，Up to 150 Mbps）|
|A-MPDU and A-MSDU aggregation, 0.4_ s guard interval support|
|Frequency range||2.4~2.5 GHz|
|Bluetooth||Protocols||Bluetooth v4.2 BR/EDR and BLE standards|
|Radio||NZIF receiver with -97 dBm sensitivity|
|Hardware||Network port specifications||RJ45, 10/100Mbps, Cross-direct connection adaptive|
|Serial baud rate||80~5000000|
|Operating voltage||5V or 3.3V|
|Operating current||Average: 80mA|
|Supply current||Minimum: 500 mA|
Half pad/ Through-hole connector( Optional）
|Wi-Fi security mechanisms||
Remote OTA upgrade via network
|Software development||SDK used for further development|
|IP access methods||
|Transparent transmission modes||
TCP Server/TCP Client/UDP Server/UDP Client
|User configurations||AT+ commands set|
- 1 Adet WT32-ETH01 Ethernet to Wifi / Bluetooth Gateway Modül