Yeni Ürün Dual RFID Okuyucu Weigand 7941d

 

Dual RFID Okuyucu Modül Weigand 7941d 125khz 13.56Mhz
Manyetik Kart Anahtarlık Etiket Personel Takip Kapı Giriş Kontrol Sayaç Proximity Em4100 ISO14443A F08 S50 S70

 

     125khz ve 13.56Mhz rfid kart, anahtarlık etiket vb ürünleri okuyabilen devre.

 

RFID Ürün Seçim Bilgisi:

     13.56Mhz ve 125Khz olmak üzere 2 tip rfid ürünü vardır. Kart yada anahtarlıklarınızın üzerinde numaralar var ise sisteminiz 125Khzdir. Yazı yoksa 13.56Mhz dir. Ürün seçimini buna göre yapmanız gerekmektedir.

 

Özellikler:

  •   Dual RFID Modül Weigand 7941d
  •   Çalışma voltajı:  DC 5V
  •   Çalışma akımı: 40mA
  •   İletişim:   Weigand (5 pin)   W26   W34
  •   Desteklenen protokoller:  ISO14443A, F08, S50, S70,  EM4100
  •   Rfid frekansı:  125kHz  /  13.56Mhz
  •   Okuma mesafesi: 1-8 cm  
  •   Çalışma sıcaklığı:   -10C  /  70C
  •   Renk: Yeşil
  •   Boyutlar:   16mm x 46mm x 6.5mm
  •   Ağırlık:  gr

 

Pin açıklaması:

  • VCC: Çalışma voltajının pozitif girişi.
  • GND: Çalışma voltajının negatif girişi.
  • D0: Veri çıkış terminali. Data0'a aynı.
  • D1: Veri çıkış terminali. Data1'e aynı.
  • FOR: Biçim seçimi. Varsayılan W26. Gnd'ye bağlanırsa W34 biçimidir.

 

Weigand protokol tanıtımı:

  • When it sensors the card, the serial number will be output via Data 0, Data 1 two data wire
  • Data 0 and Data 1 are high level when there is no data output
  • Data Bit 0: it will generate 400us low level on Data 0 wire
  • Data Bit 1: it will generate 400us low level on Data 1 wire
  • Every data length is 2400us
  • Every Mifare card has a serial number with 4 bytes, users should output the last three bytes
  • Add the first 12-bit even check bit in the front and add the last 12-bit odd check bit in the back, 26-bit data in total
  • Card number is 6B 3D 12 D6 for W34 fromat
  • Output data is 3D 12 D6 for W26 fromat
  • Weigand 26 Code

 

Weigand 34 Code if card number is 6B 3D 12 D6:

  • 0x00: hatta kontrol biti
  • 6B 3D 12 D6: kart numarası
  • 0x00: tek çek

 

Weigand 26 Code if card number is 6B 3D 12 D6:

  • 0x00:Even Check bit
  • 3D 12 D6:Card number
  • 0x00:Odd Check

 

 

Paket içeriği :

  •    1 Adet Dual RFID Okuyucu Weigand 7941d
  •     5 Pin kablo

.

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi

Doğrulama Kodu

Dual RFID Okuyucu Weigand 7941d

  • Marka: OEM
  • Ürün Kodu: Dual RFID Okuyucu Weigand 7941d
  • Stok Durumu: Stokta var
  • Fiyat : 438,00TL
  • KDV Dahil : 525,60TL

Etiketler: Dual, RFID, Okuyucu, Modül, Weigand, 7941d, 125khz, 13.56Mhz, Manyetik Kart, Anahtarlık, Etiket, Personel Takip, Kapı Giriş Kontrol, Sayaç, Proximity, Em4100, ISO14443A, F08, S50, S70