SM141K04LV Tek kristal Güneş Hücresi
2.23V 55mA 300nm-1100nm Algılama Aralığı
IXOLARTM SolarMD is an IXYS product line of Solar Module made of monocrystalline, high efficiency solar cells. The IXOLARTM SolarMD is an ideal for charging various battery powered and handheld consumer products such as mobile phones, cameras, PDAs, MP3-Players and toys. They are also suitable for industrial applications such as wireless sensors, portable instrumentation and for charging emergency backup batteries.
With a cell efficiency of typically 25%, SolarMD gives the ability to extend run time even in "low light" conditions and increase battery life and run time in a small footprint, which can be easily accommodated in the design of portable products. The design allows connecting SolarMD flexibly in series and/or parallel to perfectly meet the custom-specific application’s power requirements.
- Manufacturer IXYS
- Series IXOLAR
- Type Monocrystalline
- Categories Solar Cells
- Voltage - Open Circuit 2.76V
- Voltage @ Pmpp 2.23V
- Current - Short Circuit (Isc) 58.6mA
- Current @ Pmpp 55.1mA
- Power (Watts) - Max 123mW
- Efficiency %22
- Package / Case Cells
- Operating Temperature -40°C ~ 90°C
- Long life
- Stable output
- Weight 3 grams
- Size / Dimension 45mm x 15mm x 2.1mm
Polycrystalline cells are commonly found in outdoor applications and have a spectral sensitivity range of 500nm to 1100nm. They’re in the medium price range and typically offer a 13% power conversion efficiency.
Monocrystalline cells, such as the IXYS SolarMD, have a spectral sensitivity range from 300 nm (near-ultraviolet) to 1100 nm (near-infrared), which includes visible light (400 to 700 nm). Due to this wide spectral range, they can be used in both indoor and outdoor applications. Monocrystalline or single-crystalline material is the most expensive but it does not contain impurities, and as such the power conversion efficiency does not degrade over operating time. The power conversion efficiency of commercially available monocrystalline cells ranges from 15 to 25%. The surface of these cells is a homogenous dark blue or dark grey.
SolarMD is made of monocrystalline, high-efficiency solar cells in a surface mountable package. They’re robust and can be used in harsh environments. Solar cells used in SolarMD have a very high (22%) power conversion efficiency, which means that 22% of the light energy is converted into electrical energy. They’re extremely useful in applications requiring solar power generation in a limited space.
Monocrystalline cells can be used in indoor and outdoor applications because they have a wide spectral sensitivity, 300 to 1100 nm. However, the output power of a solar cell is proportional (over a wide range) to the incoming light energy, and irradiance is generally much higher outdoors. The values in the data sheet are measured at “standard condition” of 1 sun, which is equal to 1000W per square meter sunlight irradiance at a defined light spectrum (air mass of 1.5) and 25°C cell temperature.
Paket içeriği :
- 1 Adet SM141K04LV Monokristal Güneş Hücresi