Microchip DSPIC33FJ64GS606-I/PT

16Bit dsPIC series Microcontroller 40MHz 64KB Flash ADC DAC Uart SPI CAN I2C 64-TQFP (10x10)

Operating Conditions 

•    3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
•    3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

Core: 16-Bit dsPIC33F

•    Code-Efficient (C and Assembly) Architecture
•    Two 40-Bit Wide Accumulators
•    Single-Cycle (MAC/MPY) with Dual Data Fetch
•    Single-Cycle Mixed-Sign MUL plus Hardware Divide
•    32-Bit Multiply Support

Clock Management

•    ±1% Internal Oscillator
•    Programmable PLLs and Oscillator Clock Sources
•    Fail-Safe Clock Monitor (FSCM)
•    Independent Watchdog Timer (WDT)
•    Fast Wake-up and Start-up

Power Management

•    Low-Power Management modes (Sleep, Idle, Doze)
•    Integrated Power-on Reset and Brown-out Reset
•    1.7 mA/MHz Dynamic Current (typical)
•    50 µA IPD Current (typical)

High-Speed PWM

•    Up to 9 PWM Pairs with Independent Timing
•    Dead Time for Rising and Falling Edges
•    1.04 ns PWM Resolution
•    PWM Support for: DC/DC, AC/DC, Inverters, PFC, Lighting, BLDC, PMSM, ACIM, SRM
•    Programmable Fault Inputs
•    Flexible Trigger Configurations for ADC Conversions

Advanced Analog Features

•    High-Speed ADC module: 10-bit resolution with up to two Successive Approximation Register (SAR) converters (up to 4 Msps)
•    Up to 24 input channels grouped into 12 conversion pairs plus two voltage reference monitoring inputs
•    Dedicated result buffer for each analog channel
•    Flexible and Independent ADC Trigger Sources
•    Up to 4 High-Speed Comparators with Direct Connection to the PWM module
•    10-bit Digital-to-Analog Converter (DAC) for each comparator
•    DAC reference output
•    Programmable references with 1024 voltage points

Timers/Output Compare/Input Capture

•    Six General Purpose Timers: Five 16-bit and up to two 32-bit timers/counters
•    Four Output Compare (OC) modules Configurable as Timers/Counters
•    Quadrature Encoder Interface (QEI) module Configurable as Timer/Counter
•    Four Input Capture (IC) modules

Communication Interfaces

•    Two UART modules (12.5 Mbps): With support for LIN/J2602 2.0 protocols and IrDA®
•    Two 4-Wire SPI modules (15 Mbps)
•    ECAN™ module (1 Mbaud) with ECAN 2.0B Support
•    Two I2C™ modules (up to 1 Mbaud) with SMBus Support

Direct Memory Access (DMA)

•    4-Channel DMA with User-Selectable Priority Arbitration
•    UART, SPI, ECAN, IC, OC and Timers

Input/Output

•    Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or 6 mA on 66 Pins
•    5V Tolerant Pins
•    Selectable Open-Drain and Pull-ups
•    29 External Interrupts