ST STM8S003F3P6 TSSOP-20 8 Kbytes Flash 16 MHz
8-bit MCU CPU 16 I/O Mainstream Value Line Integrated EEPROM
Description
The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual (RM0016). The STM8S003F3/K3 value line devices provide the following benefits: performance, robustness and reduced system cost.
Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.
The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
Full documentation is offered as well as a wide choice of development tools.
All features
Core
16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
Extended instruction set
Memories
Program memory: 8 Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles
RAM: 1 Kbyte
Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles
Clock, reset and supply management
2.95 V to 5.5 V operating voltage
Flexible clock control, 4 master clock sources
Low-power crystal resonator oscillator
External clock input
Internal, user-trimmable 16 MHz RC
Internal low-power 128 kHz RC
Clock security system with clock monitor
Power management
Low-power modes (wait, active-halt, halt)
Switch-off peripheral clocks individually
Permanently active, low-consumption power-on and power-down reset
Interrupt management
Nested interrupt controller with 32 interrupts
Up to 27 external interrupts on 6 vectors
Timers
Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
8-bit basic timer with 8-bit prescaler
Auto wakeup timer
Window and independent watchdog timers
Communications interfaces
UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode
SPI interface up to 8 Mbit/s
I2C interface up to 400 Kbit/s
Analog to digital converter (ADC)
10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog
I/Os
Up to 28 I/Os on a 32-pin package including 21 high-sink outputs
Highly robust I/O design, immune against current injection
Development support
Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging
Paket içeriği :
- 1 Adet STM8S003F3P6
- Series: STM8S003F3
- Mounting Style: SMD/SMT
- Package/Case: TSSOP-20
- Core: STM8
- Program Memory Size: 8 kB
- Data Bus Width: 8 bit
- ADC Resolution: 10 bit
- Maximum Clock Frequency: 16 MHz
- Number of I/Os: 16 I/O
- Data RAM Size: 1 kB
- Operating Supply Voltage: 2.95 V to 5.5 V
- Minimum Operating Temperature: - 40 C
- Maximum Operating Temperature: + 85 C
- Packaging: Tube
- Brand: STMicroelectronics
- Data RAM Type: RAM
- Data ROM Size: 128 B
- Data ROM Type: EEPROM
- Interface Type: I2C, SPI, UART
- Number of ADC Channels: 5 Channel
- Number of Timers/Counters: 3 Timer
- Processor Series: STM8S
- Product Type: 8-bit Microcontrollers - MCU
- Program Memory Type: Flash
- Subcategory: Microcontrollers - MCU
- Supply Voltage - Max: 5.5 V
- Supply Voltage - Min: 2.95 V