J-Link
1.612,80TL
KDV Hariç: 1.344,00TL
- Stok Durumu: Stok Var
- Marka: OEM
- Model: JLINK
- SKU: RBZ.100.942
Jlink Arm Jtag Swd Programlayıcı Hata Ayıklayıcı Debugger
ARM7 ARM9 ARM11 Cortex A5 A7 A8 A9 A12 A15 A17 M0 M1 M3 M4 M7 M23 M33 R4 R5
Ürün klon Jlink v9 programlayıcıdır. Ürün ile alakalı hiç bir teknik destek verilmez.
Ürün paketi açılarak test edilir. Çalıştığı görülerek kargolanır.
Description
- J-Link is a USB powered JTAG emulator supporting a large number of CPU cores.
- Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.
- J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Features
- Direct download into flash memoryof most popular microcontrollers supported
- Supported CPUs: Any ARM7 ARM9 ARM11 Cortex A5 A7 A8 A9 A12 A15 A17 M0 M1 M3 M4 M7 M23 M33 R4 R5
- Download speed up to 1 MByte/second
- Supports unlimited breakpointsin flash memory!
- Setting breakpoints inexternalflash memory of Cortex-M systems is possible with
- J-Link's unlimited flash break points technology
- Supported by all major IDEs
- Supports concurrent access to CPU by multiple applications
- Crossplatform support (runs on Windows, Linux, Mac OS X)4
- Intelligence in the emulator firmware
- Remote Server included. Allows using J-Link remotely via TCP/IP
- GDB Server included
- Production flash programming software (J-Flash) available
- Software developer kit (SDK) availableMore info...
- Supports multiple target interfaces: JTAG, SWD
- Supports SWV/SWO (Serial Wire Viewer / Serial wire output)
- Wide target voltage range: 1.2V - 3.3V, 5V tolerant
- Supports JTAG chains with multiple devices
- Embedded trace buffer (ETB) support
- Various target adapters available, including optical isolation adapter
- RDI interface DLL available.
- Fully plug and play compatible
- No power supply required, powered through USB
- Support for adaptive clocking
- All JTAG signals can be monitored, target voltage can be measured
- Target power supply: J-Link can supply
Paket İçeriği：
- 1 Adet J-link Programlayıcı
- 1 Adet Usb kablo
- 1 Adet 2x10 pin kablo
