New Product NUCLEO-H753ZI

 

ST NUCLEO-H753ZI Stm32 Geliştirme Kartı

STM32H753ZI 480MHz Arm Cortex-M7 Cpu Fpu 2 MB Flash 1 MB SRAM ST-LINK V2 Debugger Programmer Arduino Ethernet

 

     The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the internal or external SMPS significantly reduces power consumption in Run mode.

     The ST Zio connector, which extends the ARDUINO Uno V3 connectivity, and the ST morpho headers provide an easy means of expanding the functionality of the Nucleo open development platform with a wide choice of specialized shields.

     The STM32 Nucleo-144 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.

     Flexible power-supply options: ST-LINK USB VBUS or external sources.

     On-board ST-LINK/V2-1 debugger/programmer with usb re-enumeration

     Capability: mass storage, virtual com port and debug port.

     Comprehensive free software libraries and examples available with the STM32Cube MCU package.

     Arm Mbed Enabled compliant (only for some Nucleo part numbers)


Features:

  •    STM32H753ZI in LQFP144 package microcontroller
  •    ARM 32-bit Cortex-M7 CPU with FPU
  •    480MHz max CPU frequency
  •    2 MB Flash
  •    1 MB SRAM
  •    VDD from 1.62V to 3.6V
  •    Chrom-ART Accelerator
  •    Hardware JPEG Codec
  •    3 user LEDs
  •    2 user and reset push-buttons
  •    32.768 kHz crystal oscillator
  •    SWD connectors:
  •    ST Zio expansion connector including ARDUINO Uno V3
  •    ST morpho expansion connector
  •    Flexible power-supply options: ST-LINK USB VBUS, USB connector, or external sources
  •    Comprehensive free software libraries and examples available with the STM32Cube MCU Package
  •    Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
  •    Features specific to some of the boards
  •    External or internal SMPS to generate Vcore logic supply:
  •    Ethernet
  •    USB Device only, USB OTG full speed, or SNK/UFP (full-speed or high-speed mode)
  •    Board connectors:
  •    USB with Micro-AB or USB Type-C
  •    Ethernet RJ45
  •    On-board ST-LINK (STLINK/V2-1, STLINK-V3E, or STLINK-V3EC) debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
  •     High-resolution timer (2.1 ns)
  •     32-bit timers(2)
  •     16-bit timers(12)
  •     SPI(6)
  •     I2C(4)
  •     I2S (3)
  •     USART(4)
  •     UART(4)
  •     USB OTG Full Speed and High Speed(1)
  •     USB OTG Full Speed(1)
  •     CAN FD(2)
  •     SAI(2)
  •     SPDIF_Rx(4)
  •     HDMI_CEC(1)
  •     Dual Mode Quad SPI(1)
  •     Camera Interface
  •     GPIO (up to 114) with external interrupt capability
  •     16-bit ADC(3) with 36 channels / 3.6 MSPS
  •     12-bit DAC with 2 channels(2)
  •     True Random Number Generator (RNG)
  •     16-channel DMA
  •     LCD-TFT Controller with XGA resolution
  •     Cryptographic acceleration: AES 128, 192, 256, TDES, HASH (MD5, SHA-1, SHA-2), HMAC
  •     Secure firmware upgrade support, Secure access mode

 

Paket içeriği:

  • 1 Adet NUCLEO-H753ZI  Kit

 

Dikkat = Paket içerisinden usb kablo çıkmaz.

 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

NUCLEO-H753ZI

  • Fiyat : 1,530.00TL
  • KDV Dahil : 1,836.00TL

Tags: ST, NUCLEO-H753ZI, Stm32, Geliştirme Kartı, STM32H753ZI, 480MHz, Arm, Cortex-M7, Cpu, Fpu, 2 MB Flash, 1 MB SRAM, ST-LINK V2, Debugger, Programmer, Arduino, Ethernet