Rotary Encoder Modül

KY-040 Rotary Encoder Modül

 

     Bu Arduino uyumlu Rotary Encoder / Döner Enkoder Modülü çeşitli projelerde kolayca kullanabileceğiniz bir giriş birimidir. Modülden çıkan 5 pin sayesinde üzerinde bulunan push buton da dahil olmak üzere bütün fonksiyonları kolaylıkla kullanabilirsiniz. 5V ile çalışan bu enkoderin çıkışları dijital olup saat yönünde farklı saat yönünün tersinde farklı çıkış vermektedir.

     Çıkışların detayları için ürünün dokümanlar kısmındaki pdf dosyasını inceleyebilirsiniz bu dokümanda ayrıca arduino için örnek kodu da bulunmaktadır.


Özellikleri :

  • Çalışma Voltajjı : 5V
  • 5 Pin
  • 360 Derece
  • Adım Sayısı 20
  • Push Buton Özellikli
  • Arduino Uyumlu
  • Saat yönü ve saat yönü tersine dönüşlerde farklı çıktı verme
  • Renk : Siyah
  • Boyutlar: 31 x 19 x 29 mm

 

 

      The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devices With fixed bolt hole for easy installation Great for DIY project. By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer counter, which species rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0.

      How it works: incremental encoder is a displacement of the rotary pulse signal is converted to a series of digital rotary sensors. These pulses are used to control angular displacement. In Eltra angular displacement encoder conversion using a photoelectric scanning principle. Reading system of alternating light transmitting window and the window is not consisting of radial indexing plate (code wheel) rotating basis, while being an infrared light source vertical irradiation light to the code disk image onto the receiving on the surface. Receiver is covered with a diffraction grating, which has the same code disk window width.

      The receiver's work is to feel the rotation of the disc resulting changes, and change the light into corresponding electrical changes. Then the low-level signals up to a higher level, and generates no interference square pulse, which must be processed by electronic circuits. Reading systems typically employ a differential manner, about the same but the phase difference of the two waveforms different by 180°compared to the signal in order to improve the quality and stability of the output signal. Reading is then the difference between the two signals formed on the basis,thus eliminating the interference.
 

 

Paket İçeriği:

  •      1 Adet  Rotary Encoder Modül

 

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Rotary Encoder Modül

  • Brand: OEM
  • Product Code: KY-040 Modül
  • Availability: In Stock
  • Fiyat : 7.50TL
  • KDV Dahil : 8.85TL

Tags: Rotary Encoder Modül