6 Led Driver Module

6 Led Flash Driver Module

Sequential Sliding Running Flash Light Lamp 3V/4.5V Toy Car Decoration Diy Kit

     A board to which 6 leds can be connected and which lights and turns off the leds in sequence. It lights and turns off the leds in sequence clockwise. Wires and component legs are soldered directly to the solderable pads. The circuit becomes operational easily and in a short time. With its small structure it takes up very little space. It is used by connecting a supply between Dc 3V/5V to the supply pads. You can operate it with a battery. It is used in products such as toys, decoration, etc. 

     If you can cut from the middle section without separating the pads from the pcb, smd leds can also be used on this board. In this way you can use smd 0805 leds by soldering them onto the board. The pads can easily be separated from the pcb, you must be careful about this. The 2 pads at the far left are the pads used by the manufacturer. You can try on those pads and understand whether you will be successful. Physical intervention to the product prevents return.

Features:

• 6 Led Driver Module
• Operating voltage: DC3V /  4.5V
• Number of leds: 6
• Operating temperature:  -20C  /  70C
• Color: Green
• Distance between two pins:  2mm
• Dimensions:  11mm x 22mm
• Weight:  0.4gr

Package contents:

• 1 Pcs 6 Led Driver Module

.