Usb Electronic Load 2x10w

2x10W Usb Electronic Load 5V 1A 2A Discharge

5W 10W Load Selection Switch Resistor Battery Accumulator Powerbank Capacity Power Supply Test Led Indicator

     This board is used as a load in various applications. It can be used in cases such as determining the capacity of a battery or testing the currents that a system similar to an adapter can supply. The product works according to ohm laws. The 5V battery voltage coming through the usb socket is dissipated on the 2 resistors on the product. The battery capacity can be calculated by measuring the discharge time of the battery. Thanks to the 2 different resistors selectable with the main switch, it can perform 2 different current dissipations. 5ohm (10W ) resistors can be connected to the circuit via the switch so as to dissipate 1A and 2A.

     Since high current passes through the resistors on the board, the resistors will heat up. The temperature on the resistors can reach 85 degrees. You need to pay attention to this during use. In the first uses you may get a slight smoke or burning smell. This is normal. In later times this will disappear. You can be sure that the product is not defective.

     With the led indicator you can see whether the resistors are connected to the system or not. If a battery test is being performed, the led brightness will change according to the capacity of the battery, which also allows the situation to be perceived visually. There are 1A and 2A markings next to the switch. Depending on this switch movement, green and red leds become active. The green led lights up for 1A load. You see the red led color for 2A load.

Features:

•  2x10W electronic load.
•  Operating voltage: Usb 5V
•  Operating current: 1A / 2A
•  Power  5W / 10W
•  Led indicator: Green 1A / Red 2A
•  Product color: Green
•  Operating temperature:   -20C  / 85C
•  Current selection switch
•  Dimensions: 18mm x 75mm x 10mm
•  Weight: 15gr

Package contents:

• 1 Piece Usb Electronic Load