EXM1

EXPKITS EXM1 8 Bit Microchip PIC Development Training Board

Features

•  Microchip 8 bit PIC microcontroller support.
•  Support for microcontrollers from different companies via external mcu socket. (External mcu Section)
•  40 and 28 pin ZIF socket support.
•  20, 18, 14 and 8 pin IC socket support.
•  3 crystal sockets.
•  Programming pics without removing them from their sockets with the ExpKits Exprog USB 2.0 programmer.
•  Programming pics on external circuits in ICSP mode.
•  5 external circuit output ports. External circuit support suitable for this port structure will be provided.
•  2x16 LCD support and contrast pot
•  128x64 GLCD support
•  240x128 GLCD support
•  GLCD contrast pot.
•  Driver circuit for touch.
•  4 pcs 7 segment display
•  8 way dipswitches. They allow various small circuits to be connected to the main circuit.
•  Mini joystick.
•  USB communication circuit.
•  RS232 communication circuit.
•  RS485 communication circuit.
•  SHT1x temperature and humidity measurement circuit.
•  DHT11 temperature and humidity measurement circuit.
•  Temperature measurement support with DS1820.
•  Analog temperature measurement support with LM35.
•  2 pots for analog signal measurement.
•  Buzzer circuit.
•  2 pcs 220V 3A relay output circuit.
•  2 pcs digital input circuit. ( 2x Opto input )
•  Servo motor driving support.
•  IRDA support.
•  RF-RX module support.
•  RF-TX module support.
•  Photocell LDR circuit.
•  I2C serial EEPROM.
•  Operation from USB power. No external source is needed while on USB.
•  Operation with external power supply. (Connecting a maximum 9V DC adapter is normal.)
•  USB or external power selection socket.
•  5V and 3.3V voltage circuit and operating voltage selection socket.
•  4 pcs 5x2 IDC output sockets for all pins.
•  Single row pin header output socket for all pins.
•  Ability to Pull-Up and Pull-Down each pin separately with 8 way Tristate dip switches.
•  32 LEDs connected to each pin and ability to control led groups as ports.
•  Ability to control all mcu pins with 32 buttons.
•  Ability to define the level of the buttons as 5V or GND over 1KR.
•  Reset circuit.
•  Increased protection of the kit with optional plexiglass base.
•  Manufactured using 1st class quality PCB and Smd materials.

Package Contents:

•  1 pcs EXM1 Pic Development board
•  1 pcs USB cable
•  1 pcs 20 Mhz crystal
•  1 pcs 4 Mhz crystal
•  1 pcs Program dvd

Note = Materials such as PIC, 2x16 LCD, GLCD, DS1820, SHTXX, DHT11, Keypad and Plexi are not included in the package. Some of these should be obtained from bundle listings or purchased separately from the store.

SAMPLE APPLICATION VIDEOS

Product presentation page   http://www.expkits.com/?s=exm1.htm