50Kg Weight Sensor

50kg Weight Sensor Loadcell

Scale Electronic Balance Half Bridge Square Industrial Weight Control Systems Load Cell HX711

       This 50kg capacity weight sensor (loadcell) is an aluminum bodied weight measurement element containing a 1000ohm strain gauge in a half bridge structure. Thanks to its analog output structure, it converts the load applied on it into a voltage signal. It can be easily integrated into microcontroller systems by being used with load cell amplifier modules such as HX711. A single sensor measures 50kg; 100kg can be reached with 2 sensors in a parallel full bridge setup, and 200kg measurement with 4 sensors.

     There are 3 cables on the sensor: supply plus, supply minus and analog signal output. It produces analog voltage under load. In order to read this low level signal, a load cell amplifier module such as HX711 must be used. The supply voltage must be in the range of 5V to 10V.

Warnings:

• Calibration is required.
• Mechanical mounting direction is important.
• Hx711 module is not included.

Features:

• Supply voltage: DC 5V - 10V
• Capacity: 50kg
• Structure: Half bridge (half-bridge)
• Internal structure: 1000ohm half bridge strain gauge
• Input/output resistance: 1000ohm, tolerance 50ohm
• Output sensitivity: 1.1mV/V, tolerance 0.15mV/V
• Comprehensive error: 0.2% F.S
• Non-linearity: 0.2% F.S
• Repeatability: 0.1% F.S
• Hysteresis: 0.2% F.S
• Overload capacity: 150% F.S
• Operating temperature: -10C to 50C
• Material: Aluminum alloy
• Size: 34mm x 34mm x 8mm
• Weight: 21gr

Areas of use:

• Electronic balances and platform scales
• Bunker and hopper scales
• Conveyor belt scales
• Arduino, esp32 and other microcontroller based weight measurement projects
• Weight reading systems with 24 bit precision using the Hx711 module
• Industrial weight control systems

Cable connection description:

• Red: Supply plus
• Black:  Supply minus
• White:  Signal output

Package contents:

• 1 Piece 50Kg  Weight Sensor