IP5328P Powerbank Module

IP5328P Powerbank Circuit 5V 2.4A Dual Usb Output

QC2 QC3 Fast Charge 9V 12V Output Type C Micro Usb Input Lithium Lion 18650 Battery Charge Mobile Portable Power Supply Battery Phone

If the battery voltage is low, the IC stays in locked state. When voltage input is applied to the circuit and the battery starts charging, the lock is released and the circuit starts giving output.

The product is damaged if the battery is connected in reverse.

If the current delivery capacity of the battery is low during fast charge, the voltage cannot rise. Battery capacity is important for fast charge.

     Powerbank circuit with dual usb output and Qc2 Qc3 fast charge support. It can be turned on and off with the button on the side. The 3.7V battery voltage is boosted and delivered as a 5V source from 2 usb outputs for external use. It provides fast charge support and can deliver 9V 12V voltage to target circuits from the outputs. It charges the battery connected to the board through the Type C and Micro usb sockets.

     A 3.7V lion battery is connected through the B+ and B- pads. More than one battery can be connected in parallel. Increasing the number of parallel batteries increases the charging time. The discharge time also increases. The battery capacity should not be greater than 20000mah. Reverse battery connection damages the product. If batteries connected in series are connected, the product is damaged. When the battery is charging, the charge capacity of the battery is shown on the screen.

Warnings:

• Connecting the battery in reverse causes permanent damage to the product.
• Battery connection cables should not be made with thin wires. They must be able to carry 5A current. They should not be too long
• A quality battery should be used. Do not use old and worn batteries.
• More than one 3.7V battery cannot be connected to this circuit in series. You can increase the number of batteries in parallel. Increasing the number of parallel batteries increases the discharge time, and of course the charging time also increases.
• You should not use batteries with protection circuits. Current limited batteries may prevent this board from operating at full capacity.
• Type c is only an input port. it does not give output
• Do not solder the batteries with soldering irons at long duration and high temperature. Use of nickel wire is recommended.

Features:

• Powerbank circuit with dual usb output
• Input voltage:  DC 5V  Type C / Micro usb / Ios
• Charge current: 1A
• Output sockets: 2 Pcs Usb A   /  Type C
• Output voltage and current: DC   5V,3.1A  /  7V,2.4A   /   9V,2.0A   /   12V, 1.5A
• Output power:  Maximum  18W
• Input sockets:  Micro usb   /  Type C
• Charge current:  5A during fast charge
• Input power:  Dc 5V 10w  maximum
• On off button. Short press is for turning on and off. When pressed for more than 10s the system is reset.
• QC2, QC3, FCP, AFC, MTK, Apple, Samsung and BC1.2 fast charge protocol support for target devices.
• There is fast charge support for the battery connected to the board through the Micro usb port.
• It can charge 3.7V lithium batteries.
• Charge voltage: 4.2V
• 4 battery capacity indicator leds.
• Efficiency:  95%
• Current control support with current sensor
• Low voltage protection
• Short circuit protection
• High voltage protection
• High current protection
• High temperature protection
• Color: Black
• Operating temperature: -10C  /  80C
• 4 Mounting holes
• Dimensions:  33mm x 65mm
• Weight:   14gr

Package contents:

•      1 Pcs IP5328P Powerbank Module

.