Encoder Module 600 Pulses LPD3806-600BM-G5-24C

LPD3806-600BM-G5-24C 600 Pulse Optical Encoder

DC 5V-24V Rotary Encoder AB 2 Phase Motor Rotation Speed Direction Angle Distance Position Measurement Sensor NPN

If the A and B phase lines are connected directly to VCC, the product will be damaged. Read the pin description and make the connections.

     It is an optical sensor that produces 600 pulses in one full turn. It is used for measuring parameters such as rotation speed, direction, angle, acceleration, travel distance. According to this information, we can perform various control operations precisely. It is used to understand the speed of moving systems and where the system is. Or, for example, it can be used for the control function in a sound control operation.

     It can operate with DC 5-24V supply. As the encoder shaft rotates, the signals generated are counted with a microprocessor kit or circuit such as arduino and the rotation count is found. The outputs are used by connecting to an mcu pin with a pull up resistor. If the encoder ends are free, you may not be able to measure properly with an oscilloscope. It would be appropriate for you to measure with a scope by connecting to the supply with 2 pull up resistors.

Features:

•     AB two phase optical rotary encoder
•     Operating voltage: DC 5V-24V
•     Operating current: 30mA
•     NPN Type output structure
•     Signal count: 600 pulses / turn
•     Maximum mechanical speed: 6000 rpm
•     Integrated speed: 2000 rpm
•     Operating temperature: -20C  /  65C
•     D type shaft 6mm x 13mm
•     M3 fixing screw holes
•     Cable length: 1,5meters
•     Height: 38mm( 43,5mm)
•     Diameter:   41,5mm
•     Weight: 155gr

Cable Connection Description

•     Green = A phase
•     White = B phase
•     Red = VCC Supply + pin
•     Black = GND

Package Contents:

• 1 Piece Encoder Module 600 Pulses LPD3806-600BM-G5-24C

.