35V to 5V 10A 4 Port Usb Board

35V to 5V 10A Voltage Step Down 4 Port Usb Output Socket

Android Apple High Speed Charging 2.1mm Adapter and Terminal Block Input Sockets Step Down

There are also versions of this product manufactured with low quality material.

The product connection is shown in image number 2.

     It is a voltage step down circuit with 4 usb port outputs. Each usb port is controlled by a separate charge control ic. It has high speed charging support. It has the capacity to supply 2A current per port. You can power 4 devices at the same time. It can provide 8A in total. You can safely charge 4 phones, tablets etc. devices at the same time in the highest charging mode. It can also charge Apple phones at the highest charging speed.

     The product can be powered from a source between DC 8-35V. You need to power the product with a supply 1.5 times the power you will draw at the output. That is, you need to have a 50-60watt source. You must use a minimum 24V 3A adapter. Of course, lower power input adapters can also be used for lower currents. It is not appropriate to use many products in vehicles. However, you can use this product by powering it from the in-vehicle power line. There is a 4 pin terminal block socket and a 2.1mm adapter input socket for the power input. You can also take a fixed 5V output to the outside from the terminal block sockets.

     Very good quality mosfets, special MLCC capacitors and quality materials have been used. It has low output noise. It operates at high efficiency ( %96 ) and the energy loss is very low. There is a high voltage protection circuit at the output. It prevents devices from being damaged. The product produces low heat. It does not need external cooling hardware. 2 double layer usb sockets of a quality that can be used 2 times longer than standard usb sockets have been used.

Features:

• Input supply voltage: DC 8V  -  35V
• Power can be taken from inside the vehicle ( 12V - 24V )
• Input power:  At full power usage, it must be used with a source above 50w.
• Output voltage: 5.1V
• Output current: 10A
• 2 Double layer output usb sockets
• 4 separate high speed charge control ics for 4 usb ports
• It can charge Apple and Android phones at high speed. 
• It can supply 5V 2A current per port.
• High voltage protection at the output
• 4 pin terminal block input socket
• 2.1mm adapter input socket
• A fixed 5V output can be taken from the terminal block socket.
• Efficiency: %96 Low energy loss
• Low heat generation
• High quality mosfets, special mosfets and use of material of higher quality than standard
• The usb sockets are of a quality that can be used 2 times longer than standard sockets.
• 2 Pieces M2 1 piece M3 mounting hole
• Dimensions: 54mm x 39mm x 21mm
• Weight: 42gr

Package Contents:

•     1 Piece 35V to 5V 10A 4 Port Usb Module