- Stok Durumu: Stok Var
- Marka: OEM
- SKU: RBZ.100.296
IR Infrared Fire Detector Security Alarm Robotic Coding Arduino Iot
It is designed to detect the infrared light emitted by flame and fire sources. It is a compact and economical sensor module used in short range fire detection applications. It shows high sensitivity to IR light in the 760nm to 1100nm wavelength range. It provides a digital output with the LM393 comparator IC and can be used directly with microcontrollers.
When a flame, sunlight or a strong IR source is detected, if the set threshold is exceeded the status led lights up and a digital LOW or HIGH level is produced from the DO pin.
It can be used as a fire detection sensor in fire extinguishing robots. Sensitivity can be adjusted with the trimpot on it and a digital output is obtained. This module is suitable for fire alarm systems, automatic shutdown or triggering scenarios, experimental projects and educational applications.
Features:
- Operating voltage: DC 3.3V - 5V
- Operating current: 15mA
- Signal output: Digital output (0 or 1)
- Wavelength: It can detect IR light in the 760nm to 1100nm range.
- High sensitivity to the flame spectrum
- Detection angle: 60 degrees
- Detection distance: Approximately 80cm with a lighter flame
- The detection distance increases as the flame grows
- It can be used in fire extinguishing robots and fire detection systems.
- LM393 comparator IC
- DO: Digital output pin
- Sensitivity can be adjusted with the adjustment pot.
- It can be used as an IR receiver board.
- Mounting hole
- 3 pin male header connection
- Dimensions: 14mm x 31mm
- Weight: 3gr
Pin descriptions:
- VCC: 3.3V or 5V supply input
- GND: Ground
- DO: Digital output pin
Areas of use:
- Fire alarm and warning systems
- Automatic fire extinguishing projects
- Industrial safety applications
- Arduino and similar microcontroller projects
- Education and experiment kits
- Flame detection in robotic projects
- Smart home security scenarios
- 1 Piece Flame Fire Detection Sensor
