16mm LED Cabled Latch Type Metal Button

16mm Red Power Symbol LED Cabled Latching Type Metal Button

Latch Panel Mount Flat Head COM NO NC DC 6A 12V IP67 Waterproof Stainless Steel Button Start Control Automation

     This is a 16mm diameter, 5 pin metal latch type push button switch. It has IP67 waterproof protection. It can be used in wet or dusty environments. It has a maximum Dc 6A 12V switching capacity. It has COM, NO and NC output pins. It has a power symbol LED indicator. The operating structure of the LED and the switch is shown in the table below. The product comes with ready-made 14cm cables. It can be connected to your system very easily with these cables.

     The switch is a latch type. It stays fixed in the pressed state. When the button is pressed, the target circuit operates. When the button is pressed again, the target circuit stops operating. Initially, the Com and Nc pins are short-circuited. When the button is pressed, the switch connects the Com and No pins. It is used by mounting onto surfaces with a 16mm round hole.

Features:

• 12V 16mm Button Latch Type Cabled Red
• Head type: Flat
• Operating current/voltage capacity: 6A 12V DC    /  AC  3A 250V
• Contact form: NO, NC, COM
• Number of pins: 5
• Contact resistance: less than 50mohm
• Insulation resistance: 1000Mohm
• LED voltage:   AC/DC 12V / 24V
• LED current: 15mA
• Power symbol LED indicator
• LED color: Red
• Contact material: Silver alloy
• Button material: Stainless steel
• Protection type: IP67 / IK08
• Service life: 100,000 hours
• Mechanical life: over 50,000 on/off cycles
• Maximum pressing force: 3N / 5N
• Material: Metal / Plastic
• Operating temperature: -20C  /  +85C
• Color: Metallic Gray
• Mounting hole: 16mm
• Cable length: 140mm
• Dimensions: 16mm (18mm) x 35mm
• Weight: 20gr

Package contents:

• 1 Piece 16mm LED Cabled Latch Type Metal Button