220V PIR Motion Sensor 25cm Wired

220V PIR Motion Sensor 25cm Wired

Led Lamp Ceiling Light Stairs Automatic Fixture Floodlight Corridor Car Park Cabinet Lighting Day Night Detection

Use at powers lower than 40W. It can be led or energy saving bulbs etc. If you switch at high powers the product will be damaged.

If you want motion detection during the daytime as well, the top of the cds ldr component in picture number 9 must be covered.

     It is a PIR type motion sensor with a 220V switch. It performs day night detection. When the product detects motion in the dark it activates the output. It is a sensor that can detect depending on motion ( body temperature ). You can think of it as a stairway light automation. After motion detection it keeps the load ( the lamp ) on for 45 seconds. That is, the lamp works for 45 seconds. Then it turns off automatically.

     You can use it in applications with powers below 40W. If you switch at high power the product breaks down and the connected devices may be damaged. Make the 220V connection to the long cables. Make the load lamp connection to the short cables. It is important that you do not make an incorrect connection. Make sure the power is off while making the connections.

Features:

• 220V pir motion sensor 25cm wired
• Motion detection distance: 3/5 meters
• Angle: 220 Degrees
• Operating voltage: 110-220V
• Power: less than 40W
• Operating time 45sec
• Operating temperature:  -25C  /  +60C
• mounting hole diameter: 19mm
• Cable length:   250mm
• Dimensions:  28mm x 36mm
• Weight:  13gr

Cable Description: Make the connections as below or as in picture number 3.

• Long Brown: 220V Connection N 
• Long Blue: 220V Connection L
• Blue: 220V Connection L for the load
• Yellow:  Load connection cable

Package Contents:

•     1 Piece 220V PIR Motion Sensor 25cm Wired

.