EX8L2

FEATURES:

•      Support for 18, 28, and 40 pin microcontrollers among Microchip 8 bit PIC microcontrollers.
•      40 pin ZIF socket support.
•      Programming pics on the kit with the ExpKits Exprog USB 2.0 programmer. 
•      Programming pics on external circuits in ICSP mode. Or connecting to the board with programmers such as ICD2.
•      RS232 communication circuit.
•      RS485 communication circuit.
•      SHT1X temperature and humidity measurement circuit.
•      DS1820 socket.
•      2 pots for analog signal measurement.
•      Photocell LDR circuit. 
•      Ability to operate from USB power. No external source is needed while on USB.
•      Ability to connect an external power supply. (Connecting a 9V adapter is normal.)
•      Ability to select USB or external power.
•      4 way 7-Segment display.
•      5x2 IDC output sockets for all pins.
•      Ability to Pull-Up and Pull-Down each pin with Tristate dipswitches.
•      32 LEDs connected to each pin and ability to control led groups as ports.
•      Ability to control all MCU pins with 32 buttons.
•      Ability to connect the buttons to +5V or GND.
•      2x16 LCD socket.
•      LCD contrast pot.
•      Reset circuit.
•      Ability to give an audible warning with BUZZER.
•      EEPROM support.
•      1st class quality PCB is used.
•      Automatic assembly is done using SMD materials for the passives.

  Package contents :

• 1 pcs EX8L development board 
• 1 pcs Program CD/DVD
• 1 pcs USB cable
• 1 pcs 20 Mhz crystal
• 1 pcs 4 Mhz crystal

Note = PIC,  2x16 LCD, SHT11 and DS1820 are not included in the package.

Product presentation page:  http://www.expkits.com/?s=ex8l2-.htm