JDY-23 Dip Bluetooth 5.0 Module

JDY-23 Dip Bluetooth 5.0 Module

CC2541 Ble Wireless Communication Rf Transceiver Digital Communication Mobile Phone Computer Wireless Control Data Transfer

     JDY-23 is a Bluetooth 5.0 wireless communication module. It operates at 2.4ghz frequency. It has low current consumption. Connection is established easily thanks to the 6 pin male header dip module structure. It has Uart communication pins. It uses the AT commands given in the table below. It works in slave mode. It is used together with ble supported devices such as mobile phones.

     There is 1 indicator led. It has a built-in pcb antenna.  The maximum communication distance is 60 meters. The distance is lower in indoor areas.

Features:

• Model: JDY-23
• Bluetooth version: BLE 5.0 ( compatible with BLE4.0, BLE4.2)
• Type: Slave
• Operating voltage: DC 1.8V - 3.6V
• Transmission distance: 60m
• Operating frequency: 2.4Ghz
• Transmission power: 4db  maximum
• Communication interface: Uart
• Built-in pcb antenna
• Receiver sensitivity: -97dbm
• RF-TX/RX peak current : 5mA
• Awakening state current : 800uA（Broadcast）
• Light sleep state current :<50uA (Broadcast)
• Deep sleep current : 9uA （No broadcast）
• Settings are saved to memory.
• Operating temperature:  -10C  /  80C
• Color: Blue
• Dimensions:  19mm x 32.5mm x1.8mm
• Weight: 3.5gr

Pin description:

•     PWRC: Sleep control pin
•     VCC: Power pin DC 3.6 / 6V
•     GND: Ground
•     TXD: Uart output pin ( TTL level )
•     RXD: Uart input pin ( TTL level )
•     STAT: Connection status indicator

Package Contents:

•  1 Piece JDY-23 Dip Bluetooth 5.0 Module