- Stok Durumu: Stok Var
- Marka: OEM
- SKU: RBZ.100.924
STLINK V2 Mini Clone Arm Jtag Programmer Swd Swim Uart Dfu
Stm32 Stm8 ST-LINK Stlink Metal Case Debugger Debug Tool
Currently only the purple color is available in stock.
Stliink v2 is an stm32 and stm8 processor programmer device belonging to the company st. It can work with the software of the company St, and it can also work with other IDEs similar to Keil IAR. This product comes in a metal case. The programmer has a 2x5 10 pin socket output. It has Swd, swim and uart pin outputs. A 4 pin dupont cable is supplied with the product. You can program by connecting to the target circuit with these cables.
The target circuit supply can be taken over the programmer. However, if the target circuit draws high current, transferring this voltage to the target circuit over usb is not suitable. The correct way of operation is for the target circuit to have its own supply. If there is high voltage on the target circuit side and it reaches the programmer as a result of a faulty connection, the programmer can be damaged. The usb port it is connected to can be damaged. In addition, the computer it is connected to can also be damaged. You need to use it paying attention to these.
If there is software that could prevent the use of the product, you should remove it from your system. The software you installed to write code may have loaded the drivers required for the programmer to be recognized by the computer. The product drivers can be downloaded from the st site. After the driver is installed, you can use the product on the computer. In addition, the STM32CubeProgrammer software is also downloaded from the st site.
Features:
- STM32 STM8 IC programming support
- Swd and swim connection support
- Operation with St company software.
- Ability to work with programs such as Keil Iar
- 5,3V 3,3V operation support
- Usb socket structure that can be plugged directly into the pc
- Aluminum metal case protection
- Pin information is written on the case. The writing is of a non-erasable structure.
- You can power circuits that draw low current over the device.
- 500MA resettable fuse
- Stlink operating status indicator led.
- Easy and fast connection to the target circuit with its socket to which a dupont cable can be connected.
- It is shipped in an anti static bag.
- Dimensions: 57mm x 17mm x 9mm
- Weight: 12gr
Package contents :
- 1 pcs STLINK V2 Mini STM32 Arm Jtag Programmer
- 1 pcs 4 pin 15cm Dupont Cable
