DC 200V 10A Voltmeter M4430

Panel Type DC 0-200V 10A mV Voltmeter mA Ammeter M4430

 Blue Red 0.28” 4 Digit 7 Segment Indicator Digital Voltage Current Meter Display

     It is a module with 0-200V Voltmeter 0-10A Ammeter feature. The 4 digit and red colored voltmeter display is at the top. The 4 digit and blue colored current display is at the bottom. It can display at mA mV level. It measures and displays with high accuracy.

     The voltmeter measuring capacity has 2 levels depending on the supply of the device. There is a diagram for the connection in Picture 2. If the device supply and the measuring leads are the same, the measuring voltage range is between 4-30V. A 3 thin wire cable with socket for voltage measurement comes with the product. The black cable is used as the ground lead. The red colored one is the + cable for the device supply. The yellow cable is the measuring lead. If the red and yellow leads are used joined together, the measuring range is between 4-30V as we stated above. If used joined together and you apply a voltage higher than 30V, the product will be damaged. If there is a possibility to supply the voltmeter from a 2nd power supply, you can operate it separately with the yellow lead in the wide voltage measuring range between 0-200V.

     A cable with 2 thick wires and a 2 way socket also comes with the product for current measurement. With this cable it is connected in series to the part whose current is to be measured. It performs current measurement with the shunt resistor available on the device.

     There are 2 pots on the back of the device to be able to calibrate the errors in current and voltage measurements. If you have another measuring instrument whose measuring accuracy you trust; you can calibrate the ammeter and voltmeter according to this device by means of the pots.

Features:

•     Voltmeter supply voltage : DC 4,5 - 30V ( If you apply more than 30V the product will be damaged.)
•     Reverse connection protection available. ( It may be damaged if high voltage is present for a long time)
•     Voltmeter measuring range : DC 4 - 30V  / DC 0 - 200V   ( Picture 2 )
•     Current measuring range : DC 0 - 10A
•     Voltage accuracy : 0,001V
•     Current accuracy : 0,001A
•     2 pieces 4 digit 0,28” 7 segment display
•     Refresh Rate : 300ms
•     Dimensions:  60mm x 28,6mm x 22mm
•     Panel Dimensions: 57.5mm x 26.0mm
•     Weight: 25gr

Package Contents :

•   1 Piece 0-200V 10A Voltmeter Ammeter
•   1 Piece 3 pin voltmeter connection cable
•   1 Piece 2 pin ammeter connection cable