XR2206 Signal Generator DIY Kit

XR2206 Signal Generator DIY Kit

1Hz -1MHz Square Triangle Sine Wave Signal Generator Adjustable Frequency Adjustable Voltage

     Signal generator module. It produces sine, triangle and square wave signals. It can produce an adjustable signal in the 1Hz 1Mhz frequency range.  The signal amplitude is also adjustable.

     The device supply voltage can be between DC 9V - 12V. You can operate it with a 9V battery. The battery does not come in the package. you can use external power or a 9V battery. (The battery is not included in the package.) It has a small size for easy carrying.

     While the long screws are being screwed into the bottom plexi part, they get stuck on the small parts inside the hole. You need to use the nuts with the small screws. 

Technical Specifications:

• IC: XR2206
• Operating voltage: DC  9V-12V
• Square wave output signal support
• Triangle wave output signal support
• Sine wave output signal support
• Impedance:  600 Ohm + 10%
• Frequency range:    1Hz - 1MHz 
• Sine Wave
• Amplitude: 0 - 3V at 9V DC input
• Distortion: less than 1% (at 1 khz)
• Flatness: + 0.05db 1Hz - 100kHz
• Square Wave
• Amplitude: 8V at 9V DC input (unloaded)
• Rise time: less than 50ns (at 1 khz)
• Fall time: less than 30ns (at 1 khz)
• Symmetry: less than 5% (at 1 khz)
• Triangle Wave
• Amplitude: 0 - 3V at 9V DC input
• Linearity: less than 1% (up to 100 khz) 10mA
• Dimensions:   55mm x 71.5mm x 32mm
• Weight: 60gr

Package contents:

•     1 Piece XR2206 Signal Generator Kit
•     1 Piece plexi box parts ( you need to remove the labels on them.)

Note: The battery does not come in the package.