L9110 4 Channel Motor Driver Module

L9110 4 Channel Dc Motor Driver Board

 
     The L9110 4 channel motor driver is a circuit with which you can control 4 motors from the same circuit. It is an ideal motor driver circuit especially for use in 4wd vehicle construction. There are four L9110 motor driver ICs on the board. With the driver board, which works at an input voltage between 2.5-12V, four separate dc motors can be controlled in both directions. Or 2 stepper motors can be driven.

     The driver output voltage is 7,6V. Thanks to this, its use with 6V motors is quite easy. It can supply up to 800mA continuously and up to 2A momentarily per channel. It can be used comfortably in mini sumo, line following robots and a wide variety of motor control applications. There is no enable pin on the driver. The channels are continuously active. PWM can be applied directly to the input pins.
 
Pin Connections :

• A1: 1.motor 1.input
• A2: 1.motor 2.input
• B1: 2.motor 1.input
• B2: 2.motor 2.input
• C1: 3.motor 1.input
• C2: 3.motor 2.input
• D1: 4.motor 1.input
• D2: 4.motor 2.input
• GND: Ground connection
• Vcc: Supply Voltage

 
Technical Specifications:

•  4 Pieces L9110S IC
•  Can drive 4 DC motors.
•  Can drive 2 Stepper motors
•  Operating Voltage: DC 2.5-12V
•  Operating Current: 0.8A  ( Momentary 2A )
•  It can control two separate motors independently of each other.
•  It can supply 800mA current per channel.
•  It can supply 7,5V voltage per channel.
•  Dimensions: 31mm x 22mm
•  Weight: 7 gr

Package Contents:

• 1 Piece L9110 4 Channel Dc Motor Driver Board