12mm PBS-33B Push Button Red

12mm PBS-33B 2 Pin Push Button Red

ON OFF 1A 250V Mini Round Waterproof Switch Momentary Switch

     The PBS-33B is a 2-pin mini push button with a red dome cap that fits a 12mm panel hole. It works momentarily: the contact is normally open (NO), it closes as long as the button is held down, and when released it returns with a spring and the circuit opens again. The switching rating is 1A at 250V AC and 3A at 125V AC.

     The body has a 12mm thread; it is inserted into the panel from the front and tightened with a metal nut from behind, and it fits panels up to about 3mm thick. The 2 flat metal terminals at the back are suitable for soldering a cable or plugging on a flat (faston) cable terminal. The black plastic bezel and the red plastic cap measure about 18mm in total and weigh about 4gr.

     The red cap is easy to distinguish on a panel as a start, stop, reset or warning button. The same button is also available with black, yellow, blue, green and white caps; control panels can be organized by using a different colour for different functions.

Key features:

     Momentary operation: The circuit closes as long as the button is held down and opens when released; it does not latch. Suitable for single press commands such as start, reset and door bell.

     Red dome cap: The red cap inside the black bezel is easy to see on a panel; it is preferred for stop, reset or warning buttons.

     12mm panel mounting: The threaded body fits a 12mm hole and is tightened with a nut from behind; it suits panels up to about 3mm thick.

     1A 250V / 3A 125V switching: The contacts switch up to 1A at 250V AC and 3A at 125V AC; a comfortable margin for low voltage control circuits.

     Solder and faston compatible terminal: The 2 flat metal terminals can be soldered to a cable or fitted with a flat (faston) cable terminal.

Features:

• Product type: Momentary mini push button, spring return
• Model: PBS-33B
• Contact type: NO (normally open), closes when pressed
• Action type: Push to ON ( OFF-ON ), OFF when released
• Switching rating: 1A 250V AC / 3A 125V AC
• Number of pins: 2
• Poles and positions: 1 pole, 1 momentary position
• Panel mounting: 12mm hole
• Fixing: Threaded body, fixed to the panel with a metal nut
• Suitable panel: Up to about 3mm thick
• Terminal: Flat metal terminal, can be soldered or fitted with a flat (faston) cable terminal
• Cap shape: Dome (round) cap, black bezel
• Electrical life: At least 10,000 presses (mechanical life at least 100,000)
• Operating temperature: -25°C - 85°C
• Material: Plastic body and cap, metal nut and terminals
• Colour: Red cap, black body
• Dimensions: About 18mm x 18mm x 18mm
• Weight: About 4gr

Usage information:

• Drill a 12mm hole in the panel. Remove the nut, insert the button from the front of the panel and tighten the nut by hand from behind; do not overtighten the nut and strain the plastic thread.
• The button has no polarity; connect its 2 terminals in series in the line to be switched. The line is closed as long as the button is held down.
• If you solder, solder the terminal quickly; long heating can soften the plastic body. Insulate the solder joints with heat shrink tubing.

Areas of use:

•  Start and reset button
•  Door bell button
•  Alarm and warning systems
•  Control panel and electrical switchboard
•  Control box
•  Game console and arcade control panel
•  Machine and workbench control
•  Robot and model projects
•  Home and workshop automation circuits

Precautions:

•  This button works momentarily and does not latch in the pressed position; if an on-off (latching) switch is needed, use a latching type button.
•  Do not exceed the limit of 1A at 250V AC and 3A at 125V AC; switch high current loads such as motors and heaters through a relay or contactor, not directly.
•  It is listed as "waterproof" by sellers, but no IP protection class is specified; do not use it where it is directly exposed to water and rain.
•  When used with mains voltage the terminals are open to touch; insulate behind the panel and make the connection with the power off.

Package contents:

•  1 Piece 12mm PBS-33B Push Button Red
•  1 Piece metal nut ( Assembled )
•  Note: Cable and faston terminal are not included in the package.