STM32F401C Development Board

STM32F401C CORE BOARD

High-performance access line, ARM Cortex-M4 core with DSP and FPU, 256 Kbytes Flash, 84 MHz CPU, ART Accelerator

The product may carry STM32F401CCU6 or STM32F401CEU6 mcu. It may vary depending on the status of the products in stock. 

      The STM32F401xB/STM32F401xC devices are based on the high-performance Arm Cortex -M4 32-bit RISC core operating at a frequency of up to 84 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

     The STM32F401xB/STM32F401xC incorporate high-speed embedded memories (up to 256 Kbytes of Flash memory, up to 64 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
     All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.
The STM32F401xB/STM32F401xC operate in the - 40 to + 125 °C temperature range from a 1.7 (PDR OFF) to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
These features make the STM32F401xB/STM32F401xC microcontrollers suitable for a wide range of applications.

Why choose 401?

     In the F401 series, the chip is the cheapest, even cheaper than some F1, and crushed F1 on the main frequency, and has a floating-point arithmetic module, the IO port contains all the basic functions. Therefore, it is possible to provide a learning platform with a very high cost performance for beginners. In practical applications, it is not because the computing power is insufficient, and the IO port is incomplete and hinders development.

STM32F401CDU6

• Core Processor     ARM Cortex-M4     
• Core Size     32-Bit     
• Speed     84MHz     
• Connectivity     I²C, IrDA, LINbus, SDIO, SPI, UART/USART, USB OTG     
• Peripherals     Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT     
• Number of I/O     36     
• Program Memory Size      256KB (256K x 8)
• Program Memory Type     FLASH     
• EEPROM Size     -     
• RAM Size      64K x 8     
• Voltage - Supply (Vcc/Vdd)     1.7V ~ 3.6V     
• Data Converters     A/D 10x12b     
• Oscillator Type     Internal     
• Operating Temperature     -40°C ~ 85°C (TA)     
• Mounting Type     Surface Mount     
• Package / Case     48-UFQFN Exposed Pad     
• Supplier Device Package     48-UFQFPN (7x7)

Package contents :

•     1 pc STM32F401C Development Board
•     2 pcs 20 Pin Male Header