Usb Relay 5V 1 Channel

1 Channel USB Relay Control Module

Device On Off From Computer Hid Usb NO NC 220V 10A Switch Lamp Motor Smart Home Automation

( Long term use above 7A is not suitable. Contacts may stick. )

     1 Channel relay module controlled over the usb port. There is a 220V 10A relay on the board. When you connect it to the pc, it is recognized without the need for a driver. The relay on the board is turned on and off through the program.

     The line to be controlled is connected to the screw type terminal block. One end of the cut line is connected to the com end (middle end). The relay switch works so as to switch the com end to NO or NC. The other cut end of the cable that the relay will join is connected to one of the NO or NC terminal blocks. If the board works in the exact opposite way of what you want, it will work as you wish if you connect the cable you connected on one side to the other side.

Features:

• Usb relay control board
• Hid usb connection that does not require a driver
• Operating voltage: Usb port ( DC 5V )
• Relay power: AC 220V 10A / DC 30V 10A ( It should not be used above 7A in long term use. )
• Power indicator led.
• Relay status indicator led
• Relay life: 10.000.000 on off
• Operating system: Windows
• Operating temperature:  -10C / 80C
• Screw type 3 pin relay output terminal block ( NC / COM / NO )
• 4 mounting holes
• Dimensions:  25mm x 57mm
• Weight: 18gr

Software:

expkits.com/pub/usbrelay/usbrelay.zip

Linux:   github.com/darrylb123/usbrelay

Test Program: 

• The product is connected to the pc. The device is automatically recognized by the pc without the need for a driver.
• The test program is run. The Find device command is run. The appropriate device is selected from the address bar next to it.
• The Open device command is run. The device becomes ready to process the commands coming from the software.
• The open close commands in line with the Relay 1 button are activated. The relay on off is followed. The relay led is watched and the switch sound is heard.
• The Close device command closes the connection between the software and the hardware.

Package contents :

•    1 Piece 5V 1 Channel USB Relay Control Module
•    1 Piece Usb Cable

.