NUCLEO-F091RC

St NUCLEO-F091RC Development Board
STM32 STM32F091RC Arm Cortex-M0 Mcu 48 MHz 256 Kb Flash Can I2C USART SPI ST-LINK V2 Jtag Programmer Nucleo Arduino

     The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™Uno V3 connectivity support and the ST morpho headers allow to expand easily the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to the ARM mbed site.

Features

•     STM32F091RCT6  microcontroller in QFP64 package
•     Speed:  48MHz
•     Program Memory Size:   256KB (256K x 8)
•     RAM Size:    32K x 8
•     Connectivity:   CANbus, I2C, IrDA, LINbus, SPI, UART/USART
•     Two types of extension resources:
•     Arduino Uno V3 connectivity
•     ST morpho extension pin headers for full access to all STM32 I/Os
•     ARM mbed™ (see http://mbed.org)
•     On-board ST-LINK/V2-1 debugger/programmer with SWD connector:
•     Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
•     USB VBUS or external source(3.3V, 5V, 7 - 12V)
•     Power management access point
•     Three LEDs:  USB communication (LD1), user LED (LD2), power LED (LD3)
•     Two push-buttons: USER and RESET
•     USB re-enumeration capability. Three different interfaces supported on USB:
•     Virtual COM port
•     Mass storage
•     Debug port
•     Support of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs

STM32F091RCT6:

• Core Processor :  ARM Cortex-M0
• Core Size:   32-Bit Single-Core
• Speed:  48MHz
• Connectivity:   CANbus, I2C, IrDA, LINbus, SPI, UART/USART
• Peripherals
• DMA, I2S, POR, PWM, WDT
• Number of I/O:   52
• Program Memory Size:   256KB (256K x 8)
• Program Memory Type: FLASH
• EEPROM Size:   -
• RAM Size:    32K x 8
• Voltage - Supply (Vcc/Vdd):   2V ~ 3.6V
• Data Converters:  A/D 19x12b; D/A 2x12b
• Oscillator Type:  Internal
• Operating Temperature:    -40C / 85C (TA)
• Mounting Type:    Surface Mount
• Supplier Device Packag: 64-LQFP (10x10)

Package contents: 

• 1 Piece STM32F072B-DISCO

Only the kit comes out of the box. Usb cable is not included.