TMC2209 Stepper Motor Driver

MKS Trinamic TMC2209 V4.0 Stepper Motor Driver with Heatsink

MakerBase 1/256 Step 1.7A CNC 3D Printer Robot Reprap MKS GEN Ramps Prusa Mendel Ultimaker TMC2208 A4988

The version of the products in stock may vary from batch to batch. Currently the V4 model product is in stock. 

     A stepper motor driver board developed with the TMC2209 IC from Trinamic. It has features developed for devices such as 3D printers, cameras, scanners etc. It has an integrated microstep indexer. Thanks to StealthChop2 current control technology it runs very quietly. It can be controlled via UART communication. It is pin compatible with A4988 and TMC2208.

     The product model is MKS V2.0. It has low RDSon.  N channel mosfets are designed as an H bridge. It can deliver 2A maximum current. It must be used with a heatsink when used with high current. It can operate with a supply between DC 5-36V. It supports up to 1/256 microstep.

     The MicroPlyer  SpreadCycle StealthChop2  technologies developed by Trinamic are available on this IC

     Setting method: You can change the settings with the TMC2208 configurator and program it via the UART interface.

Features:

•  Manufacturer: Makerbase
•  IC: Trinamic TMC2209
•  Logic supply voltage ( VIO ):   DC 3V / 5V
•  It has an internal voltage regulator
•  Motor supply ( VM ):  DC 5.5V to 28V
•  Current per phase: 1.7A RMS  /  2.8A Peak   ( A heatsink must be used. )
•  Control method: Step / Dir  / UART
•  Native step count:  1/256
•  Microplayer step count: 1/256
•  RDSon    – 0.3ohm and below
•  R Sense: 0.11 Ohm
•  Micro Plyer support
•  Spread Cycle
•  Stealth Chop2
•  CoolStep
•  StallGuard4
•  Passive Braking
•  Freewheeling
•  Automatic power down
•  Color: White
•  Operating temperature: -10C  /  75C
•  8x 2 pin male header sockets.
•  Dimensions: 15mm x 20mm
•  Weight: 10gr

Package contents:

•    1 Piece TMC2209 stepper motor driver
•     1 Piece heatsink block
•     1 Piece 5 pin female female header
•    1 Piece screwdriver