Daplink Jtag Programmer Metal

Daplink Arm Jtag Programmer Metal Case Mini

Cortex Swd Uart Emulator Simulator Debugger Debugger CMSIS Serial Port U Disk Jlink Stlink Type-C Usb STM32 GD32 CH32 CKS32 APM32

Technical support will not be provided regarding the use of the product.

There are no voltage protection circuits on the product. It is essential that you pay attention to the fact that the programmer and the connected computer may be damaged while working with high voltage target boards.

     It is an open source jtag programmer with programming, debug and usb ttl communication functions. It is a product similar to jlink and stlink. Thanks to the open source code, there are no license fee expenses. It can perform fast programming. With its small structure, it is very easily portable. It is preferred with its affordable price that can be used continuously in the programming process.

     It supports Arm Cortex based processors. Daplink connects the target processor to your computer via usb. Apart from the jtag programmer function over Swd, it also has a usb uart converter function. With this function, chips that can be programmed over uart can be programmed.

Features:

• CMSIS-DAP / DAPLink
• SWD connection support
• Mainstream chip support
• Cortex M core support
• STM32, GD32, CH32, CKS32, APM32
• Ability to work with Keil MDK, IAR Workbench , OpenOCD, pyOCD and other CMSIS-DAP compatible ides
• It creates a virtual serial port (com).
• You can use it as a usb ttl converter.
• CDC - It can be used for programming, debug and log output monitoring over the serial port.
• MSC - Drag and drop flash programming support
• 5,3V 3,3V operation support
• Type C usb pc connection socket
• Pin information is written on the pcb
• You can power circuits that draw low current over the device.
• Ability to connect to the target circuit easily and quickly with its socket that can be connected with dupont cable.
• It is sent in an anti static bag.
• Windows and linux operating system support
• Metal case.
• Dimensions:  20mm x 55mm
• Weight: 7.5gr

Software:

•  There is no need for a driver. It will be recognized by the pc as a virtual com port as plug and play.CMSISDAP
•  User manual: github.com/wuxx/nanoDAP/blob/master/doc/README.md
•  Hardware and software information: github.com/wuxx/nanoDAP
•  Win7 serial port driver: github.com/wuxx/nanoDAP/tree/master/driver/windows7_serial_driver
•  Install the mbedWinSerial_16466.exe file for the Mbed driver
•  One-click programming tool Script tool: github.com/wuxx/openocd-toolbox
•  github.com/wuxx/nanoDAP/blob/master/user_manual_en.md

Package contents :

• 1 Piece Daplink Jtag Programmer
• 1 Piece 4 pin 15cm Dupont Cable

.