RP390-ST/24100 Dc Motor

RRP390-ST/24100 Dc Motor Carbon Brushed

Robot Vacuum DC 12V DIY RC Toy Model Car Boat Helicopter Vacuum Fan Electric Motor

     Produced with Standard Motor quality, the Rp390-st-24100 is a professional micro dc motor that stands out with its wide operating voltage range and high speed capacity. Thanks to its carbon brushed structure and permanent magnet (Permanent Magnet) design it offers long lasting use. It is optimized especially for use in the rotating brush mechanisms of cleaning robots, in high performance electric toys and in diy projects that require precise torque.

     Despite its compact dimensions it allows flexible operation between 6V and 24V. This motor, which is in the IE 1 efficiency class, can reach high speeds such as 18900RPM while optimizing energy consumption. It is an ideal solution for makers looking for vibration free operation and stable performance. Explosion proof (Explosion-proof) body structure

Areas of use:

•     Smart vacuum robot main and side brush mechanisms.
•     High speed electric toy modifications.
•     Handheld vacuum cleaner designs.
•     Hobby purpose model vehicles and boats.
•     Industrial prototyping works that require precise speed.

Points to be careful about:

•     In the case of mounting the motor on a mechanism with plastic parts, the maximum operating temperature should be accepted as 65C by taking the heating margin into account.
•     Going outside the specified voltage ranges may shorten the motor life or damage the brush structure.

Features:

•  Brand: Standard Motor
•  Model: RP390-ST/24100 Dc Motor
•  Operating voltage: Dc 12V  (6V - 24V)
•  Current no load: 0.15A
•  Current:  1A  ( 2.5A Maximum)
•  Speed: 8000Rpm
•  Torque: 85g.cm
•  Material: metal
•  Color: silver
•  Shaft diameter: 2.3mm
•  Shaft length:  11.6mm (Step included)
•  Screw hole: M2.5
•  Hole spacing: 16mm
•  Body dimensions: 28mm x 47mm
• Weight:  95gr

Speed:
    Speed (6V): 4200RPM (105mA)
    Speed (12V): 9750RPM (120mA)
    Speed (24V): 18900RPM

FAQ (Frequently Asked Questions)

• Q: At which voltage is the motor most efficient?
  • A: 12V DC is the most ideal voltage in terms of cost-performance balance. It runs in a balanced way with 120mA current consumption at a speed of 9,750 RPM.
• Q: In how much time should the brushes be replaced?
  • A: Between 500-1000 hours in normal use. Under high speed and high load this period may shorten.
• Q: Is the motor waterproof?
  • A: No, the motor is not waterproof. If it will be used in humid environments additional protection is required.
• Q: How is reverse rotation achieved?
  • A: Direction control can be done by changing the polarity of the terminals or by using an H-Bridge motor driver.
• Q: What is the maximum torque value?
  • A: It is not specified in the technical document, but for medium size brushed DC motors values between 50-100 gf.cm are typically expected.
• Q: How is it controlled with Arduino?
  • A: Speed and direction control can be done with the PWM pins of the Arduino by using an L298N or L293D motor driver module.
• Q: Can it run continuously?
  • A: Yes, it can run without interruption when suitable cooling is provided. At high speeds give breaks of 15-20 minutes.
• Q: How is the noise level?
  • A: Because it is a brushed motor it produces a medium level noise. Around 50-60 dB at high speeds.

Package contents:

•      1 piece RP390-ST/24100 Dc Motor