250W Boost Module

250W Boost Voltage Step Up Module

DC DC Converter Step Up 10V - 50V 8A Regulator 250 Watt

The output voltage cannot be less than the input voltage. It is a Voltage Step Up.

     It is a DC-DC step-up voltage boost circuit. The input voltage is between 8.5V - 48V. According to the voltage value applied in this range, an output voltage between 10-50V can be obtained by making use of the trimpot on the board. This voltage regulator board, which has very easy use and high performance, allows you to adjust your input voltages in many of your hobby and robotics projects. The output current can also be limited with the pot on the board. You can use it by limiting it with a constant current.

     On the regulator board, soldered cables are available ready for the connection of input and output voltages. You can easily make the circuit connections with the cables stripped by cutting their ends.

     In applications made with the board, the output voltage must always be higher than the input voltage. On the board, VIN+ is the positive supply input, VIN- is ground, OUT+ is the positive output voltage, and OUT- is the ground output.

Features:

• Input voltage : DC 8.5V - 48V
• Output voltage : Adjustable 10-50V
• Output  current 8A ( Above 3A  requires a heatsink. )
• Adjustable constant current sourcing capability.
• Output power: 250W
• The pots are multi-turn. (They turn 20-25 turns. You must turn a lot to see the change.)
• Operating temperature : -40 to + 85 degrees
• Operating frequency: 150KHz
• Efficiency: 96%
• Overcurrent protection
• Reverse connection protection
• Mounting hole: 4 x 3mm screw holes
• Dimensions: 3.5cm x 7cm x 1.5cm
• Weight: 65gr

     In a number of applications requiring high voltage such as laptop power supply, Solar panel applications, Led driver, it allows low power supplies to be used by boosting their voltage.

Pot Usage:

•     The pots are multi-turn. They can turn 20-30 turns in each of the 2 directions. Generally, one can turn very little and fall into the error that the products do not work. It is necessary to turn a lot to see the effect.
•     Turning clockwise; increases the value for the relevant parameter. For example, the voltage increases.
•     Turning counterclockwise; decreases the value for the relevant parameter. For example, the voltage drops.

Package Contents:

•      1 Piece 250W Boost DC DC Voltage Step Up Module