6 Channel 3.7V Battery Charger Board

6 Channel Usb 3.7V Lithium Battery Charger Board

0.6A / 0.2A 2mm and 1.25mm Jst-Ph Socket RC Toy Model Car Plane FPV Drone Quadcopter

     Independent 6 channel 43.7V lithium battery charger board. It takes power over the usb port. There is a separate led indicator for each channel. 1.25mm and 2mm Jst-Ph sockets are usable for each channel. It can charge at 0.6A and 0.2A current rates. There are switches on the board for current selection. If 6 batteries are to be charged at the same time, 2 of them should be charged at 0.6A. The others should be kept at 0.2A. The total charging current is 2A. It is good to use ports with a usb current capacity of 2.4A and above. On devices with lower current capacity, you may need to charge at low speeds or reduce the number of batteries charged.

     There are 6 battery charge status indicators. The leds staying on indicates that battery charging continues. The led going off indicates that charging has finished. On idle ports the leds blink. When the batteries are charged it stops automatically.

Features:

•     3.7V Lithium battery charging support
•     6 independent charging channels
•     Charging voltage:  4.2V
•     Charging current:   0.6A / 0.2A 
•     The total charging current is 2A.  If 6 batteries are to be charged, at most 2 of them can be selected as 0.6A.
•     6 pieces charging current selection sockets
•     6 pieces battery charge status indicator ( The leds being on means charging continues. The led being off indicates that charging has finished.)
•     Charging socket:  1.25mm and 2mm Jst-Ph  ( distance between 2 pins )
•     Operating voltage:  Usb 5V  Standard Usb A type male socket
•     Color: Black
•     Operating temperature:  -20C  /  65C
•     Dimensions:  2.5cm x 7.5cm x 1cm
•     Weight:  14gr

Package contents:

• 1 Piece 6 Channel 3.7V Battery Charger Board