10A 16V DC Motor Driver

5V / 16V 10A Mini DC Motor Driver Speed Control Circuit

0-100% Pot Controlled Pwm On Off Button Adjustable Voltage Module Fan Pump DC Led Dimmer

There is no reverse connection protection on the DC supply input. The product is damaged in reverse connection. Make the connection according to picture number 8.

     Motors can draw 5 times their normal current at the moment they are strained. You need to make your motor driver selection accordingly. If you do not select a driver according to the current it can draw at the moment of strain, the product will be damaged immediately. Its affordable price is thanks to the absence of many protection circuits on the device. The absence of protection circuits causes the product to be damaged in incorrect uses. If the input voltage flows to the output pins, it means the mosfet inside the product has burned out.

     It is a dc motor driver speed control circuit operating in the 5V and 16V range up to a maximum value of 10A. You can also drive loads other than a DC Motor. A voltage approximately 1V lower than the supply voltage is applied to the motor.
 

Features:

•     10A Mini DC Motor Driver
•     Input supply voltage: DC 5V / 16V
•     Maximum continuous output current: 10A  ( We recommend using it with loads of 6A and below. )
•     Maximum output power: 100W
•     Speed range: 0% / 100%
•     NE555 control ic
•     Pwm Frequency: 20Khz
•     Speed adjustment potentiometer.
•     On off switch on the potentiometer
•     Material: Various electronic materials
•     Operating temperature:   -10C  /  +80C
•     2 Mounting holes
•     Dimensions:  21mm x 30mmm x 14 mm  ( Length including pot 50mm )
•     Weight:  12gr

Warnings:

•      It is useful to use a capacitor on the supply input.
•      Speed adjustment is made with the speed control pot. Speed adjustment is obtained by varying the voltage to be transmitted to the motor between 0V and the max input voltage. There are certainly losses in torque at low voltages. It is not suitable for those who want the motor torque to remain at maximum while the speed decreases to use this type of Chinese made product.
•      You cannot use this product with AC voltage.
•      There is no reverse connection protection on the DC supply input. The product may be damaged in reverse connection.
•      The motor direction occurs according to the connection. To move it in the reverse direction, the motor connection must be reversed.

Package Contents:

• 1 Piece 10A 16V Mini DC Motor Speed Control Circuit

.