6 Pin Male Female Dupont Cable

6 Pin Male Female Dupont Programming Cable

6 Color 20cm 2.54mm Socket 28 Awg Flat Cable Electronic Circuit Test Stm32 Arduino

     This product is a 6 pin female male dupont programming cable used for making programming and serial communication connections of development boards, modules or custom designed boards in electronic circuits. It has a 1x6 female dupont socket on one end and a 1x6 male pin dupont connector on the other end.

     It is especially preferred for making programming connections on usb ttl converters, serial port programmers, Arduino compatible boards, ESP32, ESP8266, STM32, development boards and custom designed pcb circuits. It helps TX, RX, GND, VCC, reset, boot or similar signal lines to be carried in an orderly manner over a single cable. Since which line corresponds to which pin may vary depending on the board and programmer used, the pin order must be checked before connecting.

     The product only serves as a cable connection accessory. It does not have a converter, usb interface, voltage conversion circuit or protection circuit on it. The voltage level and pin layout of the board to be programmed and the usb ttl converter or programmer used must be compatible with each other. An incorrect VCC, GND, TX, RX or reset connection may damage the connected board.

     Apart from programming connections, it can also be used in sensor modules, breadboard circuits, electronic boards with pin headers and low current signal connections. Its main purpose of use is not to carry high current, but to provide low current signal and programming connections.

Features:

• 6 Pin male female flat cable
• Connector type: 1x6 Dupont
• Socket pitch: 2.54mm
• Number of pins: 6 Pin
• Cable thickness: 28awg
• Cable color:   6 Color
• Programming, serial communication and low current signal connection
• Cable length:  20cm
• Weight: 4.4gr

Areas of use:

•  usb ttl programming connections
•  Serial port communication connections
•  Arduino programming and test connections
•  ESP32 and ESP8266 development boards
•  STM32 programming and debug connections
•  Custom designed PCB board programming connections
•  Boot, reset, TX, RX, VCC, GND line connections
•  Breadboard prototype circuits
•  Sensor and module connections
•  Electronic test and development work

Points to consider:

•  Connection should not be made without checking the pin order.
•  It should not be used on lines carrying high current.
•  Reverse connection may damage the connected module or development board.
•  Care should be taken not to bend the pins while inserting the connector.
•  The product is not a power cable, it is an electronic circuit connection cable.

Package contents:

•  6 Pin Male Female Dupont Cable