Capacitive Touch Led Driver Dimmer Module

Capacitive Touch Led Driver Dimmer Module

DC 9-24V 3A 30W Coil Spring Capacitive Sensing Sensor LED Driver Dimmer

     12V led driver circuit with capacitive sensing sensor. It can operate from under a thin protective surface. There is 1 led indicator light in the section where the touch sensing springs are. This led is for determining the exact location of the capacitive touch. For this reason, the part of the box where the circuit will be placed where the button will be can be transparent enough to let the light through.  It can operate with a supply between DC 9-24V. However, it is recommended to use it with 12V. It can be used with products such as led strips. It has the feature of turning the load at the output on and off. It has 4 different modes. The way it operates changes in these modes.

Features:

• Input voltage: DC 9V-24V (12V recommended.)
• Load current: 3A (Max)
• Output power: operating at 30W power is recommended
• Standby power consumption: 0.1 W
• Standby current: 10-15mA
• It has reverse connection protection.
• Operating temperature: -20C    85C
• Spring Height: 10mm
• Spring Diameter: 10mm
• Dimensions: 42mm x 12mm
• Weight: 2gr

Note:

• The touch sensing function can be affected by electromagnetic signals.
• The Input Voltage cannot be lower than 9V or higher than 24V.
• IN; is the Input side.
• OUT; is the Output section.

Operating Mode:

S0: Normal Switch. In case of a quick touch it performs the on off function.

S1: Operation as 2 way dimming. In case of a quick touch it performs the on off function. A long touch performs the dimming process.

S2: Dimming loop operation. In case of a quick touch it performs the on off function. A long touch runs it continuously in a loop from high to low.

S3: 3 stage dimming. With a quick touch one of the 30% 60% and 100% output levels is selected.

Package Contents:

• 1 Piece Capacitive Touch Led Driver Module