10A 40V DC Motor Speed Control Circuit

10A 40V DC Motor Speed Control Driver Circuit

0/100% Potentiometer Controlled PWM Motor Fan Pump DC Dimmer Control Adjustable Voltage Module

     Motors can draw 5 times their normal current at the moment they are under strain. You must select the motor driver accordingly. If you do not select a driver according to the current it can draw at the moment of strain, the product will break down immediately.

     It is a 10A 40V DC motor driver circuit. Speed adjustment is made with the potentiometer on the board. It allows you to control the speed of the DC motor with PWM. You can increase and decrease the voltage between the input supply voltage and 0V. If reverse connection is made or high current is drawn, the product may break down. Motors can draw up to 5 times more current than the current they normally draw when they are under strain. You must select the motor driver by paying attention to this.

Features:

•     10A 40V Dc motor driver
•     Operating voltage: DC 12V / DC 40V
•     Maximum output power: 400W. ( 250W should not be exceeded in continuous use.)
•     Maximum output current: 8A ( Momentary 10A )
•     No-load current:0.02 A
•     10A short circuit current protection fuse
•     PWM adjustment range: 10% / 100%
•     Operating frequency:13KHz.
•     High efficiency.
•     High torque.
•     Low heat generation.
•     Operating temperature: -20C / 40C
•     4 x mounting holes
•     Potentiometer extension socket
•     4 x connection terminals
•     Dimensions: 60mm x 55mm x 28mm
•     Weight: 60gr

Note:

1.  Cannot be used with brushless motors.
2.  There is no reverse connection protection. In reverse connection the product is damaged. Be sure to check the connections twice before applying power.
3.  Be sure to cut the power when a connection change is to be made.

    Package Contents:

• 1 x 10A 40V DC Motor Speed Control Circuit

.