1 Channel IR Remote Controlled 5V Relay Module

1 Channel Infrared Remote Controlled 5V Relay Module

     The relay module works with a 5V supply; when you connect the supply, a led indicating that it is working will be active. Thanks to the relay on it, you can switch AC 220V or DC 30V. With the IR remote control you can perform the control operation up to a distance of 8 meters.

     There is 1 jumper on the board. Depending on the state of the jumper, the relay board works in 2 different modes. If the jumper is short circuited, the relay turns on with the signal coming from the remote control. When the remote control button is released, the relay turns off. The relay operates as long as the button is pressed. The board switches to the 2nd operating mode when the jumper is removed from its place. When the jumper is not installed, the relay becomes active on the 1st press on the remote control. On the 2nd press, the relay turns off.

     The relay board has the ability to learn different 38khz remote controls. If you have different 38khz remote controls, you can register your remote control and perform the control of the relay through your own remote control. There is 1 button on the relay board. If you hold this button pressed for 5 seconds, the led on the board starts to blink. This shows that the board has switched to learning mode. While the led is blinking, press the desired button of the remote control to be taught. If this operation is successful, the led stops blinking and it starts to be controlled from the button you pressed on the relevant remote control.
 
 

Features:

•     1 Channel infrared remote controlled relay module
•     5V Supply input
•     The relay draws 100mA current. (0.1A)
•     1 pcs power led
•     1 pcs relay status led.
•     DC 30V 10A AC250V 10A relay switching power,
•     Control distance up to 8 meters
•     Relay Board Dimensions: 53 mm X 19 mm X  18 mm
•     Remote Control Dimensions: 86 mm X 40 mm X  7 mm

 
Remote learning operation method has two kinds:
 

• Hold the S1 button more than 5 seconds, light LED1 lights, said into the learning state, then loosen the button S1, then press the remote control button, indicator light as long as scintillation, says study has successfully!
• Alignment with the remote control module of infrared receiving head, long press any key to 10 seconds, light LED1 lights, said into the learning state, then press the remote control button, indicator light as long as scintillation, says study has successfully! (cancel the learning status can click the S1 button when LED1 long bright, or wait 30 seconds will automatically quit learning!)
• Theory of distance is 8 to 12 meters, but depends on the surrounding environment factors in actual applications and intermediate blocking (such as the diaphragm. Glass or other materials blocking), receiving head adopts HX1838T (T version of the quality is very good, not generally receive head) used in the experiment, can receive 38 k any remote control frequency coded data!
•  Learning infrared remote control switch, as the name implies, can let the single chip microcomputer to remember a button on the remote control key data, and let it control relay switch, through the study of again, can modify the keys of the stored data, for example, the use the "8" button on the remote control to you to learn, can use the "8" to do after successful control keys, data is not lost when power supply drop, if you want to use button "9" as a control, it needs to make changes to a microcontroller learning is, don't understand please look at the video above results!

Note: Most of the remote control of home appliance can be learn to identify, but air conditioning remote control, the 38 KHZ is remote control can't be learned!

Package contents :

•    1 pcs 5V Relay Module
•    1 pcs Remote Control