5-30V Battery Capacity Indicator JX-4615-A3

5-30V Battery Capacity Indicator
2S / 8S Li-ion LiFePO4 Lead Acid Battery Accumulator Level Capacity Meter Tester Led Display Car Motorcycle

Outside the set battery voltage range, the leds do not emit any light. This shows that you have made an incorrect setting. In such cases, press and hold for 2s to enter the menu setting. If you can enter the menu setting, you can understand that the product works and that you have made an incorrect setting.

     It is a capacity indicator for Li-ion LiFePO4 and lead acid batteries up to DC 5V / 30V. It has a 5 Led capacity bar. Each led shows the capacity of the battery in 20% steps. The 1st Led is multi functional and is an rgb led.

     Due to the operating voltage requirement of the product, it cannot be used with 1S batteries. You can use it to measure the capacities of 2S / 8S batteries and 12V/24V lead acid accumulators.

Features:

•     Operating voltage: DC 5V / 30V
•     Operating current: <10mA
•     Battery types:  Li-ion, LiFePO4, Lead Acid
•     Cell count for lithium batteries:  2S / 8S
•     Lead acid battery support: DC 12V / DC 24V
•     Display: 5 Led indicator ( 1st led rgb )
•     Refresh rate: 500ms
•     Program setting button
•     Material: Plastic / Electronic part
•     Color: Black
•     Operating temperature:  -20C  /  65C
•     Cable length:  9cm
•     Dimensions:   15mm x 46mm
•     Weight: 4.5gr

Usage:

• There is a mode setting button on the left side of the product. Pressing this button long and short performs the functions of opening, selecting and saving the settings. The setting menu has 2 stages. In the 1st stage the battery type is selected. In the 2nd stage the cell type is selected.
• For battery selection of the product, the mode button is pressed for 2s and the 1st led starts to blink. Since the 1st led is rgb, it will light in different colors. After entering the setting, pressing the button briefly again changes the color of the 1st led.  The led colors are for the selection of the battery type. Below it is explained which battery will be used according to the led colors. When the appropriate color comes, hold for 2s and complete the battery selection. And it will move to the menu where the battery cell count is set.
  1. Red led means lithium battery.
  2. Green led is for use as LiFePO4 battery.
  3. Yellow led is for lead acid accumulators.
• The menu after selecting the battery type is the part where the battery cell count is set. According to the table below the listing or in picture number 7, the states of the leds numbered 2-3-4-5 are changed by pressing the button briefly. Set it to the led state suitable for your battery cell count and press the setting button for 2s more to have the settings saved. After saving, it will start to show the battery capacity.
• If the button is not used for 5s while in the setting menu, it automatically exits the setting mode.
• Outside the set battery voltage range, the leds do not emit any light. This shows that you have made an incorrect setting. In such cases, press and hold for 2s to enter the menu setting. If you can enter the menu setting, you can understand that the product works and that you have made an incorrect setting.

Package Contents:

•     1 Pcs 5-30V Lead Acid Accumulator Level Indicator

.