RP2040 Zero Module

Raspberry Pi Zero RP2040 Dual Core 133Mhz 2Mb Module

Arm Cortex-M0+ 264Kb Type C Mini Computer Micropython Ws2812 Rgb Led Micro Controller Development Board

( Pin headers are factory soldered )

     It is a mini development board built with the raspberry pi rp2440 processor. RP2040 is a dual core high performance arm cortex mo+ processor running at 133mhz. It has 16mb flash and 264Kb ram memory. Hardware such as the type c usb connection and rgb led are on the board. It can be programmed with software such as C/C++, micropython, circuitpython and arduino.

     It has a nine pin connection socket on two edges and a five pin male header connection socket at the bottom section. Power supply and communication operations are done over type c. There is l2C, spi, pio, uart and usb communication support. The Ws2812 rgb led is controlled over io 16. You can produce the color you want by using the red, green and blue colors at different levels.

Features:

•     IC: Raspberry Pi RP2040
•     Cpu: Dual core arm cortex m0+
•     Cpu speed: 133MHz
•     Flash memory: 2MB ( w25q16jvuxiq )
•     Sram: 264Kb
•     Communication and power supply: Type C usb socket
•     Operating voltage: DC 3.3V
•     Digital io: 20 pieces  ( 9 solderable pads )
•     Programmable io ( pio ): 8 Pieces
•     Analog io: 4 pieces 12-bit
•     Iic: 2 Pieces
•     Spi: 2 Pieces
•     Uart: 2 Pieces
•     Reset button
•     Boot button
•     WS2812 rgb led
•     Drag and drop programming support over usb
•     Internal crystal
•     Internal temperature sensor
•     Voltage regulator
•     C/C++, micropython, circuitpython and arduino software support.
•     Color: Blue
•     Operating temperature:  -10C  /  65C
•     2 sockets of 9 pins on 2 edges of the board. 100 mil pin spacing
•     5 pin socket at the bottom section. 100 mil pin spacing
•     Dimensions: 18mm x 23.5mm 
•     Weight: 3.5gr

Code update:

•    Connect it to the pc over the Type C socket.
•    Press and hold the boot button
•    Press and release the reset button.
•    Release the boot button after 1 sec
•    The pc detects a removable disk
•    Copy the programming files to the disk. Press the reset button again.

Software support:

• raspberrypi.com/products/raspberry-pi-pico/
• forums.raspberrypi.com
• raspberrypi.com/documentation/
• docs.micropython.org/en/latest/rp2/quickref.html
• thonny.org
• waveshare.com/wiki/RP2040-Zero

Arduino:

• In File / Settings /  "Additional boards manager URLs" section ; add the link below with a semicolon. 
  https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json

• In the Board manager section, search for RP2040 and install the board library that appears.
• Plug in the usb cable while pressing the boot button.

Package contents:

•    1 Piece RP2040 Zero Module