SW-18010P Vibration Module

SW-18010P Vibration Detection Sensor Module

Tilt Motion Shock Detector Switch High Sensitivity Alarm NO

     It is a vibration detection module built with the SW-18010P vibration sensor. It can provide analog and digital output. It generates the digital output with a comparator circuit. You can adjust the sensitivity of the digital output with the potentiometer on it.

Features:

• SW-18010P vibration sensor
• Operating voltage: DC 3.3V / 5V
• Operating current: 15mA
• Output:  Digital 0 - 1
• LM393 comparator IC
• Sensitivity adjustment potentiometer
• Power indicator led
• Detection indicator led
• Color: Blue
• Mounting hole
• Dimensions: 3.2cm x 1.4cm
• Weight: 3gr

Usage:

• When there is no vibration the switch is in the off state. On the output side it is high ( Logic 1 )  state. The led is off.
• When vibration occurs, the switch opens momentarily. The output goes to the low ( Logic 0 ) state. The led turns on.
• The output pin can be connected directly to the mcu. The switch states can easily be monitored with an mcu or kits such as Arduino. Various operations are performed depending on whether vibration occurs.

Pin Description:

• VCC: Power + Input
• GND: Power Ground Terminal
• DO: Digital Signal Output
• AO: Analog signal output

Package contents :

•     1 pcs SW-18010P vibration module