433Mhz Remote Control 4 Buttons

433Mhz Learning Smart Remote Control

Copier 4 Buttons Garage Automatic Door Shutter Car Parking Barrier Alarm Lamp Control Smart Home

     It is a 4 button 4 channel 433Mhz remote control circuit used so that you can create a backup of your remote controls in various systems using remote control. It can be used in the process of copying remote controls operating at 433Mhz frequency. It cannot be used with products at different frequencies. Also it cannot copy all products. Some remote controls (rolling code special remote controls) cannot be copied even if they are 433Mhz. Make your purchase decision by watching the videos on Youtube.

     It can be used in systems such as garage door, barrier, alarm, lamp, shutter, motorized devices etc.

Features:

• 4 Button wireless remote learning control
• Operating frequency 433Mhz
• Number of channels: 4 (A,B,C,D)
• Communication distance: Maximum 20 meters in open area
• Supported encoding types: EV1527, IC 2262, IC 2260, IC 2240
• High copying success 
• Openable closable button cover
• Indicator led
• Material: Plastic / Metal
• Operating temperature:  -15C  /  65C
• Color: Black silver
• Battery: 27A 12V
• Measurements:  17mm x 68mm
• Weight: 15gr

List of integrated circuits it can copy: Many integrated circuits besides the list below are also supported. It also supports products with different names but using the same protocol.

2260 / 2262 family:  PT2260, SC2260, LX2260, HX2260, PT2262, SC2262, LX2262, HS2262, PT2264 

2240 family:  PT2240, LX2240, HS2240 

1527 / 527 family:  PT1527, EV1527, HS1527, HX1527, SCL1527, SCT527, FP1527, FP527 

HT series:  HT600, HT6026, HT640, HT680, HT6010, HT6012, HT6013, HT6014, HT6207, HT12D, HT46F49E, HT6P12E, HT6P20D 

SMC / CS series  CS5211, SMC918, SMC926, SMC908 

AX series  AX5026, AX5326-3, AX5326-4 

Other encoding chips  PT2292, SC5262, PLC168, NF9420116, UM3750AM, 12L-4SC, 12L4SC, 1416, 5211 

Microcontroller based:  PIC16F629, PIC16F630 

Rolling code (Partial Support):  HCS101, HCS200, HCS201, HCS300, HCS301

Usage description: 

Erasing: If the led blinks when the buttons are pressed one by one, it means there is code in those buttons. To erase, press and hold the A and B buttons. The led will blink 3 times for about 2sn. In this case release the B button. While holding the A button pressed, press and release the B button 3 times. The light will start blinking rapidly. In this case release the A button. After these operations, the remote control records are erased. When you press the buttons, no signal will come out of the led.

Copying: It is brought side by side with the remote control to be copied. The buttons to be matched on the remote controls are pressed and held simultaneously for about 2sn. The led blinks. After a short time the led will remain steadily lit. This process shows that the code of the relevant button has been recorded.

Restoring erased records:  If you erase the remote control memory by mistake, you can recover the erased data.The C and D buttons are pressed and held. When the led lights up long, it means the old codes have been loaded again. When the buttons are pressed, it is seen that the leds are active again.

    How is it done in case some keys work but the others do not work? In this case, the erase (clear) and restore operations can be used. The steps are as follows:  First erase the codes.  After the codes are erased, copy the failed keys again; you do not need to copy the other keys again. Then erase the codes again. Restore the codes. At this stage, the codes of the keys that could not be copied before are replaced with the new codes; the codes of the keys that were successfully copied before are preserved. If there are still keys that are not copied after the second copying operation, repeat the above steps until all keys are successfully copied.

Package contents:

• 1 Piece 433Mhz Remote Control (Battery is included.)